4 Preparation
VCAUTION!
Please note the safety instructions in chapter “Safety” on page 13.
4.1Opening the server
ÊExit all applications and shut down the server properly.
ÊPress the On/Off button if the server has not been switched off by the operating system.
ÊUnplug all power plugs.
ÊDisconnect all cables on the rear of the server.
3 |
1 |
2 |
Figure 2: Opening the server
ÊRemove the stabilizers from the server (see operating manual) and place the server on its four rubber feet (1), if the server is operated in the vertical position.
ÊPress and hold in the locks on both sides of the server (2), push the top cover forwards and lift it up and off (3).
TX120 | Options Guide | 19 |