Fujitsu Siemens Computers TX120 manual Expansions and conversions

Page 8

Expansions and conversions

Introduction

1.3Expansions and conversions

Main memory expansion

The system board supports up to 8 Gbyte of main memory. 4 slots (2 memory banks with 2 slots each) are provided for the main memory. Each memory bank can be equippeded with 512 Mbyte, 1 Gbyte or 2 Gbyte unbuffered DDR2 memory modules.

If the memory modules are installed in pairs, they must be identical (2-way inter- leaved mode).

Additional accessible drive

A 3.5-inch bay for an HDD extension box or a backup drive is available.

Expansion cards in the PCI slots

The following PCI slots are provided by the system board:

PCI slot

Description

1PCI slot (32-bit/33MHz)

2PCI Express x4 slot (slot in x8 size)

3PCI Express x1 slot (slot in x1 size)

8

Options Guide

TX120

Image 8

Contents Primergy TX120 Server Comments… Suggestions… Corrections… Certified documentation according to DIN EN ISOContents Contents Introduction Concept and target groupsDocumentation overview Documentation overviewIntroduction Further sources of informationExpansions and conversions Notational conventions Page Procedure Page Safety Safety Before starting up Installation and operationSafety Batteries Never remove parts of the CD/DVD drive casing Safety Working with CDs/DVDs and CD/DVD drivesLaser information Safety Modules with electrostatic-sensitive components ESD labelPreparation Opening the serverRemoving the crosspiece Removing the crosspiece PreparationDisconnecting the cables Removing the drive cageRemoving the drive cage Preparation Removing the drive cageMain memory Equipping rulesEquipping rules ModeRemoving a memory module Expanding/replacing the main memoryMain memory Installing a memory module Expanding/replacing the main memoryAccessible drives Installing an HDD extension boxInstalling an HDD extension box Fixing the rails on the HDD extension boxAccessible drives Installing an HDD extension boxRemoving the dummy cover from the top cover Installing a backup drive Installing a backup drive Fixing the rails on the backup driveUnfasten the cable clamp Connecting the USB and power cables to the backup drive Close the server see section Assembling the server on Page Expansion cards in the PCI slots PCI slot overviewInstalling an expansion card Installing an expansion cardInstalling an expansion card Closing the lock and fastening the slot cover Installing the drive cage CompletionInstalling the drive cage Connecting the cablesInstalling the crosspiece CompletionAssembling the server Assembling the serverAppendix CablingCabling AppendixAppendix CablingPower cable SAS backplane, backup drive and CD/DVD drive Cabling fan, control panel front panel TX120 Data and signal cable SAS backplane and CD/DVD drive A3C40083128 A3C40083120 A3C40085241 A3C40083117 A3C40083119 Abbreviations Abbreviations IRMC LCD ROM SSU Index Server