Verifying Basic Hardware
Figure 1 | Back of Unit |
Chassis ID
Power
plug
Management I.O
modules
Power
plug
2
4x copper line interface modules
1
Main air exhaust
144988
Step 2 Verify that you have a Chassis ID module installed. (See Figure 1).
Step 3 Verify that you have a Fabric Controller installed in the Core slot (see slot 11 in Figure 2). A second Fabric Controller module (installed in slot 12) is not required for the chassis to function, but is required to have a
| Cisco SFS 7008P InfiniBand Server Switch Installation and Configuration Note |
4 |