Cisco Systems 78-16019-02 manual Switchconfig-red# standby privilege-mode, Enable, Is disabled

Chapter 3 Initial Configuration

Configuring CPU Switch Module Redundancy

Configuring Privileged EXEC Mode Access on the Standby CPU Switch Module

Access to privileged EXEC mode from the standby CPU switch module CLI can be enabled from the active CPU switch module CLI. This feature provides extra security for the Cisco ONS 15530 system.

To configure access to privileged EXEC mode on the standby CPU switch module, perform the following steps on the active CPU switch module CLI, beginning in global configuration mode:

	Command	Purpose
Step 1
	Switch(config)# redundancy	Enters redundancy configuration mode.
	Switch(config-red)#
Step 2
	Switch(config-red)#standby privilege-mode	Enables access to privileged EXEC mode from the
	enable	standby CPU switch module CLI. The default state
		is disabled.

Example

The following example shows how to configure redundancy maintenance mode:

Switch(config)# redundancy

Switch(config-red)#standby privilege-mode enable

Displaying the Standby CPU Switch Module Privileged EXEC Mode Status

To display the privileged EXEC mode access status on the standby CPU switch module, use the following privileged EXEC command:

Command	Purpose
show redundancy summary	Displays the redundancy configuration and status.

	Cisco ONS 15530 Configuration Guide and Command Reference
3-24	78-16019-02, Cisco IOS Release 12.2(18)SV2