Cisco Systems 78-16019-02 manual Initial Configuration, About the CPU Switch Module

C H A P T E R 3

Initial Configuration

This chapter describes how to configure the Cisco ONS 15530 so it can be accessed by other devices.

•About the CPU Switch Module, page 3-1

•Starting Up the Cisco ONS 15530, page 3-2

•Using the Console Ports, NME Ports, and Auxiliary Ports, page 3-2

•About Passwords, page 3-3

•Configuring IP Access on the NME Interface, page 3-4

•Configuring the Host Name, page 3-6

•About NTP, page 3-7

•Configuring NTP, page 3-8

•Configuring Security Features, page 3-9

•About CPU Switch Module Redundancy, page 3-12

•Configuring CPU Switch Module Redundancy, page 3-15

•About the Software Configuration Register, page 3-25

•Changing the Software Configuration Register, page 3-29

•About Fan Failure Shutdown, page 3-30

•Configuring Fan Failure Shutdown, page 3-30

About the CPU Switch Module

The CPU switch module provides intelligence to the Cisco ONS 15530. The CPU switch module supports SNMP (Simple Network Management Protocol) and many MIBs (Management Information Bases).

The Cisco ONS 15530 uses a QED RM7000 RISC processor. It runs at 78 MHz externally and at 234 MHz internally. It has a 64-bit multiplexed address and data bus with byte parity running at 78 MHz. It has separate internal L1 instruction and data caches of 16 KB each and internal L2 combined instruction/data cache of 256 KB.

The CPU switch modules also contains a 32 by 32 switch fabric that directs traffic from client cards to trunk cards. The switch fabric supports 2.5 Gbps data signals with 2R transparency.

	Cisco ONS 15530 Configuration Guide and Command Reference
78-16019-02, Cisco IOS Release 12.2(18)SV2		3-1