Front panel features
Front Panel
A
B C | D | E | F | G | H |
Display
a | b | c | d | e |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| g |
| f |
| ||
Front Panel
ASTANDBY
Use this button to turn the unit on and standby.
The indicator is red in the standby mode. It turns blue when the unit is turned on.
The equipment draws nominal
BPLAY AREA
When playback is stopped, use this with Super Audio CDs to select the playback area.
Hold down this for more than two seconds to enter the setup mode.
COPEN/CLOSE/STOP
When playback is stopped, use this to open and close the disc tray.
During playback, use this to stop playback.
DRemote control sensor
Receives signals from the remote control unit. Point the remote control unit at this sensor when operating the remote control unit.
EDisplay
FDisc tray
GPLAY/PAUSE
Use this to start or pause playback.
HSKIP (.//)
Use these for skip operations. Pressing and holding these buttons for more than a second changes the scanning speed.
Display
aREPEAT indicator
Lights when repeat play is selected.
bDisc type indicator
Shows the type of disc currently loaded.
cMessage area
Alphanumeric display to show times, status messages, etc.
dDOWN MIX indicator
Lights to show that a
eMULTI indicator
Lights when the Analog Out setting is set to “Multi Channel”.
fChannel indicators
Light to show which surround channels are currently in use.
gi.LINK indicator
Lights when i.LINK output is enabled.
8