Cisco Systems SLM2024, SLM248G, SLM248P, SLM2048 Installing the Switch, Back Panel, Placement Tips

Page 5

in half- and full- duplex modes. Auto-sensing technology enables each port to automatically detect the speed of the device connected to it (10 Mbps or 100 Mbps), and adjust its speed and duplex mode accordingly.

miniGBIC — (1-2)The miniGBIC (gigabit interface converter) port is a connection point for a miniGBIC expansion module, so the switch can be uplinked to another switch by using a fiber optical link. The miniGBIC port provides a link to a high-speed network segment or individual workstation at speeds of up to 1000 Mbps.

Back Panel

The power port is located on the back panel of the switch.

2 Installing the Switch

There are two ways to physically install the switch, either set the switch on its four rubber feet for desktop placement or mount the switch in a rack.

Before you begin the installation, make sure that you have the following equipment and services:

•Tools for installing the hardware

•Cables for WAN interfaces, desktop systems, and fiber connectivity devices, or for connecting additional additional LAN interfaces

•Computer with Microsoft Internet Explorer 6.0 or later, or Mozilla Firefox version 3 or later for using web-based system management tools

Placement Tips

•Make sure that the switch is accessible and that the cables can be connected easily.

•Keep cabling away from sources of electrical noise, power lines, and fluorescent lighting fixtures.

•Do not stack free-standing switches more than four units high.

4

Cisco Small Business SLM Series Smart Switch Installation Guide

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Quick Start Guide Welcome Getting to Know the SwitchSLM2024 and SLM2048 Front PanelSLM248G, SLM248P, SLM224G, and SLM224P LEDs and Ports Common to all Switch Models Back Panel Installing the SwitchPlacement Tips Rack Mounting Desktop PlacementGetting Started with ConfigurationVerifying the Hardware Installation Troubleshooting and Suggested Next StepsNext Steps Returning the Switch to the Factory Default SettingsSupport Where to Go From HerePage Americas Headquarters

SLM2048, SLM248P, SLM2024, SLM248G specifications

Cisco Systems, a global leader in networking and cybersecurity, has developed a range of advanced network switches designed to cater to various business needs. Among these, the SLM2024, SLM248P, SLM248G, and SLM2048 models stand out for their reliability and performance in both small and medium-sized enterprises as well as larger organizations. These switches are engineered to deliver robust connectivity solutions that enhance network efficiency and management.

The Cisco SLM2024 is a 24-port switch that supports Layer 2 switching for both home offices and small businesses. With its Gigabit Ethernet capabilities, this model ensures high-speed data transmission and efficient bandwidth management. Its fanless design makes it an ideal choice for quiet environments, while advanced features like VLAN support and Quality of Service (QoS) help prioritize critical traffic and improve overall network performance.

Moving on to the SLM248P, this switch incorporates Power over Ethernet (PoE) technology. With 24 ports, it not only offers efficient data connectivity but also powers devices such as IP phones, security cameras, and wireless access points without the need for additional power sources. This capability simplifies network installation and is especially beneficial for businesses looking to expand their systems without extensive wiring.

The SLM248G further enhances the performance landscape with its advanced Layer 2 switching capabilities. Like the SLM2024, it features 24 Gigabit Ethernet ports, but it also includes enhanced security features and support for spanning tree protocols. This model is well-suited for organizations that require a robust solution for managing data flows while ensuring network security.

Lastly, the SLM2048 takes scalability and performance to a new level. With 48 ports and further PoE support, this switch is perfect for larger network environments. Its high-density port configuration caters to businesses that need to support a growing number of connected devices. Additionally, the SLM2048 provides advanced management features, including SNMP support, making it easier to monitor and configure network settings.

In summary, Cisco's SLM series switches - SLM2024, SLM248P, SLM248G, and SLM2048 - offer a blend of performance, versatility, and advanced features. They are designed to meet the diverse needs of various organizations, enabling seamless connectivity, efficient power management, and enhanced network security, thereby empowering businesses to thrive in an increasingly digital world.
Top Page Image Contents