Symphonic CSDV840E Quick Use Guide, Connections, Installing the Batteries, For the Remote Control

1 Connections

Please refer to “Basic TV Connection” on the front page before you use this unit.

RF Output Channel

If channel 3 is already occupied for broadcasting,

1)Set your TV to channel 4.

2)Insert a pre-recorded tape into this unit.

3)Press the OUTPUT button on the DVD/VCR so that the VCR OUTPUT light is lit.

•If noise appears on the TV screen, press the VCR/TV button on the remote control.

4)Press the PLAY button once.

5)After a few seconds, press the PLAY button on the DVD/VCR for 3 sec- onds.

•The RF output channel will change to channel 4 from channel 3 and you will see a playback picture.

•When a picture does not appear on the TV screen, repeat step [4].

6)Press the STOP button to stop play- back.

2	Installing the Batteries
	for the Remote Control
1	2	3

Quick Use Guide

4 Turn on the unit for the first time

VCR

VCR

1

Turn on the TV and set it to channel 3.

•If channel 3 is already occupied for broadcasting, see“RF Output Channel” section.

2	POWER	Remote Control	TV Screen
		LANGUAGE SELECT
		B ENGLISH		[ON]
	or	FRANCAIS
		ESPAÑOL

3	CH 01
	AUTO SET UP

5	Clock Set Up
	VCR
	VCR
1	MENU	-MENU-

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

BCLOCK SET LANGUAGE SELECT

or	• If the clock is not set, the
	CLOCK SET screen
	appears when you press
	the MENU button. In this
	case, go to step [2].

2		CLOCK SET
or	MONTH DAY		YEAR
	0 3	/ – –	– – – –
	HOUR MINUTE		AM/PM
	– –	: – –	– –
	Select the current month

3		CLOCK SET
	MONTH DAY		YEAR
or	0 3	/ 1 5	– – – –
	HOUR MINUTE		AM/PM
	– –	: – –	– –
	Select the current day

✄

3	VCR/DVD Switching
		POWER			OPEN/CLOSE
			SPEED	AUDIO	/EJECT
		1	2	3
					SKIP/CH.
		4	5	6
					VCR/TV
		7	8	9
	VCR button				SLOW
			0	+10
		DISPLAY	VCR	DVD	PAUSE
VCR	DVD button
	OUTPUT DVD		PLAY
	SKI		STOP
		REC/OTR
	DVD OUTPUT	MENU		ENTER
	light	SETUP	TOP MENU		RETURN
		MODE	V.SURR	SEARCH	CLEAR/
	OUTPUT button			MODE	C. RESET
		T-SET	ANGLE	REPEAT	A-B
		SUBTITLE

VCR OUTPUT light

VCR MODE

Press the VCR button on the remote control.

(Verify that the VCR OUTPUT light is lit.)

DVD MODE

Press the DVD button on the remote control.

(Verify that the DVD OUTPUT light is lit.)

Note

•Pressing only the OUTPUT button on the front panel DOES NOT switch the mode of the remote control. You MUST select the correct mode on the remote control.

Do you connect the cable from the cable box or the satellite box to the DVD/VCR’s ANT IN jack?

YES

Yes Press the MENU button to exit

NO

No Please wait for a few minutes.

After scanning...

•The tuner stops on the lowest memorized channel.

•You can select only the channels memo- rized in this unit by using the CHANNEL buttons.

4		CLOCK SET
	MONTH DAY		YEAR
or	0 3	/ 1 5	2 0 0 4
	HOUR MINUTE		AM/PM
	– –	: – –	– –
	Select the current year

5	CLOCK SET
MONTH DAY		YEAR
0 3	/ 1 5 MON 2 0 0 4
or
HOUR MINUTE		AM/PM
0 5	: – –	– –
Select the current hour

6	CLOCK SET
MONTH DAY		YEAR
0 3	/ 1 5 MON 2 0 0 4
or
HOUR MINUTE		AM/PM
0 5	: 4 0	– –
Select the current minute

7	CLOCK SET
MONTH DAY		YEAR
0 3	/ 1 5 MON 2 0 0 4
or
HOUR MINUTE		AM/PM
0 5	: 4 0	P M AM
		B PM
Select “AM” or “PM”

8To exit the CLOCK SET screen.

– 25 – EN