Cisco Systems SFS 7000 quick start Optional Install the Element Manager GUI

Page 35

13

(Optional) Install the Element Manager GUI

For more information regarding the Element Manager tasks, refer to the InfiniBand User Guide.

1.Check that you have sufficient system resources. You will need:

32 MB free RAM

50 MB disk space + 50MB additional temporary space during installation

300 Mhz processor

800x600 screen resolution, 16bit color depth

2.Insert the Topspin CD-ROM into the CD-ROM drive of a server that has network access to a Topspin management port.

3.The GUI can be found in the following location on the CD-ROM.

Linux/install_linux_ia64.bin

Linux/install_linux_x86.bin

Windows/install_x86.exe

Solaris/install_solaris_sparc.bin

4.Run the installation wizard:

a.On Windows, double-click install.exe.

b.On Solaris and Linux systems, enter sh ./install_yourOS.bin.

c.Follow the on-screen instructions.

d.Enter location and preference information as requested by the installation program.

6.Start the Element Manager.

a.On Linux platforms, change to the installation directory and run the Element Manager with

./TopspinEM.

b.On Windows platforms, click

Programs ->Topspin Element Manager ->TopspinEM.

c.When prompted to enter a device name, enter the DNS host name or IP address of the Topspin 270, and community string for the unrestricted user. The default community string for the unrestricted user is secret.

Image 35 Cisco Systems SFS 7000 quick start Optional Install the Element Manager GUI, Programs -Topspin Element Manager -TopspinEM
Contents Part Number OL-7723-01 Product ID Page Terms and Conditions of Sale for Page Regulatory Notices FCC Statement Safety InformationPage General Cautions Contact InformationViii Topspin 120 Contents List Page Thank YOU for Purchasing Your Topspin Product Product RegistrationXii Terms and Conditions of Sale for Topspin Communications, Inc Xiv Page Xvi Xvii Xviii Extent of Limited Warranty Topspin Limited End User WarrantyLimitations of Liability How to Obtain Warranty ServiceTable VIII-1 Standards Declaration of ConformityXxii Mount the Chassis in a Rack Topspin 120 Quick StartPrepare the Site Rack Mount Installation Flange 3Holding Rack Bracket Against Inside of Rack Installing the Switch with Two People 9Secure the Switch Through the Front Posts Configure Basic ConnectivityTopspin-120config#interface mgmt-ethernet Configure and Connect InfiniBand Hosts# mount /mnt/cdrom 10Fully Installed IB Cable with Pinch Connector 12Removing a Pinch Connector Prepare Your Device Optional Launch the Chassis Manager14Web Browser Window Programs -Topspin Element Manager -TopspinEM Optional Install the Element Manager GUIPage Http Index