Cisco Systems SFS 7000 quick start Contact Information, General Cautions

Page 7

vii

General Cautions

CAUTION: No user is authorized to remove the Topspin system enclosure cover. The internal chassis contains no user-serviceable components. Removing the enclosure cover voids your warranty. See the warranty card for further details regarding the servicing of your chassis.

CAUTION: Opening and/or modifying expansion and system modules may void your warranty. Refer to your warranty to determine access restrictions.

In general

Do not spill food or liquids on your system components.

Protect your Topspin system from sudden power-surges and interruptions by using a surge suppressor, line conditioner, or uninterruptable power supply (UPS).

Place cables appropriately so that they do not obstruct any egress within the data center and they do not block any ventilation inlets or outlets.

Rack mount the Topspin chassis according to the rack manufacturer recommendations.

Contact Information

Table III-1:Customer Contact Information

Address

Topspin Communications, Inc.

 

515 Ellis St.

 

Mountain View, CA 94043

 

 

 

Telephone, Corporate Headquarters

(866)

TOPSPIN or (650) 316-3300

 

 

 

Fax

(650)

316-3269

 

 

 

Telephone, Technical Support

(800)

499-1473

 

 

Email, Technical Support

support@topspin.com

 

 

Web site, Support

http://support.topspin.com

 

 

 

Image 7
Contents Part Number OL-7723-01 Product ID Page Terms and Conditions of Sale for Page Regulatory Notices FCC Statement Safety InformationPage General Cautions Contact InformationViii Topspin 120 Contents List Page Thank YOU for Purchasing Your Topspin Product Product RegistrationXii Terms and Conditions of Sale for Topspin Communications, Inc Xiv Page Xvi Xvii Xviii Extent of Limited Warranty Topspin Limited End User WarrantyLimitations of Liability How to Obtain Warranty ServiceTable VIII-1 Standards Declaration of ConformityXxii Prepare the Site Topspin 120 Quick StartMount the Chassis in a Rack Rack Mount Installation Flange 3Holding Rack Bracket Against Inside of Rack Installing the Switch with Two People 9Secure the Switch Through the Front Posts Configure Basic ConnectivityTopspin-120config#interface mgmt-ethernet Configure and Connect InfiniBand Hosts# mount /mnt/cdrom 10Fully Installed IB Cable with Pinch Connector 12Removing a Pinch Connector Prepare Your Device Optional Launch the Chassis Manager14Web Browser Window Programs -Topspin Element Manager -TopspinEM Optional Install the Element Manager GUIPage Http Index