Cisco Systems PA-2FE-TX, PA-2FE-FX Cisco 7201 Router-Example Output of the show version Command

Page 72

Chapter 4 Configuring the PA-2FE

Checking the Configuration

Cisco 7200 Series Routers and Cisco 7200 VXR Routers—Example Output of the show version Command

Following is an example of the show version command from a Cisco 7200 series router with a PA-2FE installed:

Router# show version

Cisco Internetwork Operating System Software

IOS (tm) 7200 Software (C7200-JS-M), Version 12.1(20000701:015939) [343]

Copyright (c) 1986-2000 by cisco Systems, Inc.

Compiled Sun 20-Aug-00 18:34 by pclee

Image text-base:0x60008968, data-base:0x6147A000

ROM:System Bootstrap, Version 11.1(13)CA, RELEASE SOFTWARE (fc1)

BOOTFLASH:7200 Software (C7200-BOOT-M), Version 12.0(2)XE2, RELEASE SOFTWARE (fc1)

Router uptime is 4 minutes

System returned to ROM by error - an Error Interrupt, PC 0x600BE5E0

System image file is "tftp://192.168.0.0"

cisco 7206 (NPE200) processor (revision B) with 114688K/16384K bytes of memory. Processor board ID 15463328

R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache 6 slot midplane, Version 1.3

Last reset from power-on Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp). TN3270 Emulation software.

4 Ethernet/IEEE 802.3 interface(s)

3 FastEthernet/IEEE 802.3 interface(s)

125K bytes of non-volatile configuration memory.

4096K bytes of packet SRAM memory.

20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K). 4096K bytes of Flash internal SIMM (Sector size 256K). Configuration register is 0x0

Cisco 7201 Router—Example Output of the show version Command

 

 

 

Following is an example of the show version command from a Cisco 7201 router:

 

 

 

Router# show version

 

 

 

Cisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version

 

 

 

12.4(biffDEV.061001), INTERIM SOFTWARE Copyright (c) 1986-2006 by Cisco Systems, Inc.

 

 

 

Compiled Sun 01-Oct-06 23:42 by biff

 

 

 

ROM: System Bootstrap, Version 12.4(4r)XD5, RELEASE SOFTWARE (fc1)

 

 

 

BOOTLDR: Cisco IOS Software, 7200 Software (C7200P-KBOOT-M), Version 12.4(TAZ3DEV.060927),

 

 

 

INTERIM SOFTWARE

 

 

 

c7201alpha1 uptime is 5 days, 18 hours, 32 minutes System returned to ROM by power-on

 

 

 

System image file is "disk0:c7200p-adventerprisek9-mz.2006-10-01.biffdev"

 

 

 

This product contains cryptographic features and is subject to United States and local

 

 

 

country laws governing import, export, transfer and use. Delivery of Cisco cryptographic

 

 

 

products does not imply third-party authority to import, export, distribute or use

 

 

 

encryption.

 

 

 

Importers, exporters, distributors and users are responsible for compliance with U.S. and

 

 

 

local country laws. By using this product you agree to comply with applicable laws and

 

 

 

regulations. If you are unable to comply with U.S. and local laws, return this product

 

 

 

immediately.

 

 

 

A summary of U.S. laws governing Cisco cryptographic products may be found at:

 

 

 

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

 

 

 

If you require further assistance please contact us by sending email to export@cisco.com.

 

 

 

PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration

 

 

 

 

 

 

 

 

 

4-12

 

OL-3474-07

 

 

 

 

Page 71 Page 73
Image 72
Page 71 Page 73
Contents Americas Headquarters Text Part Number OL-3474-07Cisco Systems, Inc. All rights reserved N T E N T S Adapter Using the ping Command to Verify Network Connectivity OL-3474-07 Document Revision History Document Version Date Change SummaryObjectives OrganizationRelated Documentation Section Title DescriptionPreface Related Documentation Preface Related Documentation Fast Ethernet Port Adapter Family PA-FE and PA-2FE Datasheet Xii Overview Port Adapter OverviewIeee 802.3u 100BASE-T Specifications Fast Ethernet OverviewParameter 100BASE-FX MultimodeDTE* DTE LEDs Receptacles, Cables, and PinoutsLED Label Color State Function RJ-45 Port and Connector Pin DescriptionPA-2FE-FX Duplex SC Connector Network ManagementPort Adapter Slot Locations on the Supported Platforms Cisco 7100 Series Routers Slot Numbering11 Port Adapter Slots in the Cisco 7140 Series Router Cisco uBR7200 Series Router Slot Numbering 13 Port Adapter Slots in the Cisco uBR7246VXR RouterCisco 7201 Router Slot Numbering Cisco 7301 Router Slot NumberingCisco 7304 PCI Port Adapter Carrier Card Slot Numbering SlotCisco 7401ASR Router Slot Numbering Cisco 7500 Series Routers with VIP Slot NumberingRSP VIP interface-slot RSP-slot 5 7 9 11 Identifying Interface Addresses Platform Interface Address Format Numbers SyntaxCisco 7120 Router and Cisco 7140 Router Interface Addresses Cisco uBR7200 Series Routers Interface Addresses Cisco 7201 Router Interface AddressesCisco 7301 Router Interface Addresses Cisco 7401ASR Router Interface AddressesCisco 7500 Series Routers VIP Interface Addresses OL-3474-07 Preparing for Installation Required Tools and EquipmentSoftware and Hardware Requirements Checking Hardware and Software CompatibilityPlatform Recommended Minimum Cisco IOS Release Safety Guidelines Safety WarningsWarnung Wichtige Sicherheitshinweise Avvertenza Importanti Istruzioni Sulla SicurezzaAviso Instruções Importantes DE Segurança Guarde Estas Instrucciones GEM Disse Anvisninger Page Electrical Equipment Guidelines Telephone Wiring Guidelines Preventing Electrostatic Discharge DamageFCC Class a Compliance Removing and Installing Port Adapters Handling Port AdaptersOnline Insertion and Removal Handling a Port AdapterRemoving and Installing Port Adapters Port Adapter Removal and Installation Cisco 7100 Series-Removing and Installing a Port Adapter StepRemoval applies to any Cisco uBR7200 Series Routers-Removing a Port Adapter Cisco uBR7200 Series Routers-Installing a Port Adapter Metal carrier PC boardCisco 7201 Router-Removing and Installing a Port Adapter Cisco 7301 Router-Removing and Installing a Port Adapter Page CC-PA Cisco 7401ASR Router-Removing and Installing a Port Adapter Captive installation screw With the screw removed, grasp Connecting a PA-2FE RJ-45 or SC Cable Connecting a PA-2FE-TX RJ-45 Cable-Horizontal OrientationConnecting PA-2FE-FX SC Cables-Horizontal Orientation OL-3474-07 Configuring the PA-2FE Using the Exec Command InterpreterConfiguring the Interfaces Shutting Down an InterfacePlatform Command Example Fastethernet and slot/portAdapter/port Show interfaces fastethernet Slot-number/port-number Performing a Basic Interface Configuration Fastethernet Checking the Configuration Using show Commands to Verify the New Interface StatusCommand Function Example Command Function Example Using the show version or show hardware Commands Cisco 7201 Router-Example Output of the show version Command Last reset from power-on 1 FastEthernet interface Using the show diag Command Show diag Cisco 7201 Router-Example Output of the show diag Command 0x3060 Using the show interfaces Command Configuring the PA-2FE Checking the Configuration Router# show interfaces Using the ping Command to Verify Network Connectivity Router# pingConfiguring the PA-2FE Checking the Configuration

PA-2FE-FX, PA-2FE-TX specifications

Cisco Systems PA-2FE-TX and PA-2FE-FX are high-performance Ethernet interface modules designed to enhance the capabilities of Cisco 2600 and 3600 series routers. They provide businesses with flexible and reliable networking solutions that meet the increasing demand for bandwidth and connectivity.

One of the main features of the PA-2FE-TX module is its ability to support two 10/100 Mbps Fast Ethernet interfaces. This allows organizations to connect multiple devices while improving network performance. The PA-2FE-FX module, on the other hand, is designed for optical fiber connections. It features two Fast Ethernet interfaces that utilize an SC connector for easier cable management in fiber optic environments. This capability facilitates long-distance data transmission, making it suitable for backbone connections or inter-building links.

Both modules incorporate advanced technologies to ensure efficient data handling. They support Cisco's Auto-Negotiation feature, enabling devices to automatically select the optimal speed and duplex settings, thus simplifying deployment and reducing configuration errors. This functionality is vital in environments with varied device capabilities, allowing seamless communication across the network.

The PA-2FE-TX and PA-2FE-FX modules utilize Quality of Service (QoS) capabilities to prioritize traffic, ensuring that critical applications receive the necessary bandwidth. This is particularly beneficial for VoIP services, video conferencing, and other latency-sensitive applications. Additionally, the modules offer support for VLANs, allowing organizations to segment their networks effectively and enhance security by isolating sensitive data traffic.

Another important characteristic of these modules is their hot-swappable nature, enabling users to replace them without powering down the router, thus minimizing downtime. This feature is critical for businesses that require high availability and reliability from their networking equipment.

In summary, the Cisco Systems PA-2FE-TX and PA-2FE-FX interface modules stand out for their versatility, enabling businesses to implement customized networking solutions tailored to specific needs. With support for both copper and fiber connections, advanced QoS features, and seamless integration into existing Cisco routers, these modules reinforce Cisco’s commitment to providing innovative, robust network solutions that cater to the demands of modern enterprise environments.
Top Page Image Contents