Error Warning Message Description | Cisco Systems ONS 15310-CL

Chapter 4 Error Messages

Table 4-1	Error Messages (continued)

Error Warning
ID	Error Warning Message	Description

WID-2175	Extension byte mismatch.	There is a mismatch with the extension
	{0}	byte.

WID-2176	Not all spans have the same OSPF Area ID. This will cause	Refer to the warning message text.
	problems with protection switching. To determine the OSPF
	Area for a given span, click on the span and the OSPF Area will
	be displayed in the pane to the left of the network map.

WID-2178	Only one edit pane can be opened at a time. The existing pane	Refer to the warning message text.
	will be displayed.

WID-2179	There is no update as the circuit has been deleted.	Refer to the warning message text.

EID-2180	CTC initialization failed in step {0}.	CTC initialization has failed in the specified
		step.

EID-2181	This link may not be included as it originates from the	You must not include this link as it
	destination.	originates from destination of a circuit. It is
		against the path selection algorithm.

EID-2182	The value of {0} is invalid.	The value of the specified item is invalid.

EID-2183	Circuit roll failure. Current version of CTC does not support	Refer to the error message text.
	bridge and roll on a VCAT circuit.

EID-2184	Cannot enable the STP on some ports because they have been	Refer to the error message text.
	assigned an incompatible list of VLANs. You can view the
	VLAN/Spanning Tree table or reassign ethernet ports VLANs.

EID-2185	Cannot assign the VLANs on some ports because they are	Refer to the error message text.
	incompatible with the Spanning Tree Protocol. You can view
	the VLAN/Spanning Tree table or reassign VLANs.

EID-2186	Software download failed on node {0}.	The software could not be downloaded onto
		the specified node.

EID-2187	The maximum length for the ring name that can be used is {0}.	You must shorten the length of the ring
	Please try again.	name.

EID-2188	The nodes in this ring do not support alphanumeric IDs. Please	The ring ID should not contain
	use a ring ID between {0} and {1}.	alphanumeric characters, and must be in the
		specified range.

EID-2189	TL1 keyword "all" can not be used as the ring name. Please	Refer to the error message text.
	provide another name.

EID-2190	Adding this span will cause the ring to contain more nodes than	You have reached the maximum number of
	allowed.	nodes allowed.

EID-2191	Ring name must not be empty.	You must supply a ring name.

EID-2192	Cannot find a valid route for the circuit creation request.	CTC could not complete the circuit creation
		request either beacuse there are no physical
		links, or the bandwidth of the available
		links are already reserved.

EID-2193	Cannot find a valid route for the circuit drop creation request.	Refer to the error message text.

EID-2194	Cannot find a valid route for the roll creation request.	Refer to the error message text.

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0

4-12

ONS 15310-CL, ONS 15310-MA specifications

Cisco Systems has long been a leader in networking and telecommunications technology, and among its impressive lineup of products, the Cisco ONS 15310 series stands out as an essential solution for optical networking. This series includes models such as the ONS 15310-MA, ONS 15310-CL, and ONS 15310-CA, each designed to meet the diverse needs of service providers and enterprises seeking to enhance their optical transport networks.

The Cisco ONS 15310-MA is an advanced multi-service platform designed for metropolitan area networks. It facilitates the seamless transport of data, voice, and video over optical networks. One of its main features is its ability to support a variety of interfaces, including Ethernet, SONET/SDH, and Wavelength Division Multiplexing (WDM), allowing users to integrate multiple services into a single platform. Additionally, the ONS 15310-MA supports advanced traffic management and Quality of Service (QoS) features to prioritize critical applications and ensure consistent performance.

The ONS 15310-CL variant is tailored for more specific applications, providing enhanced capabilities aimed at delivering carrier-grade services. It features a robust architecture that accommodates high-capacity traffic without compromising reliability. This model emphasizes low power consumption and a compact design, making it suitable for deployment in space-constrained environments. The ONS 15310-CL also supports a wide range of optical interfaces, making it highly flexible for various network configurations.

In terms of technologies, the Cisco ONS 15310 series leverages Optical Transport Network (OTN) capabilities, providing high efficiency and greater bandwidth utilization. OTN technology enables efficient error correction and adds resilience to the network through its built-in protection mechanisms. Furthermore, the series supports seamless integration with existing IP/MPLS networks, creating a cohesive infrastructure as organizations evolve their networking requirements.

One of the defining characteristics of the ONS 15310 series is its focus on scalability. Network operators can start with a modest deployment and gradually expand capacity as demand grows. This adaptability is complemented by Cisco's comprehensive management and monitoring tools, providing operators with real-time insights into network performance and facilitating proactive management.

In conclusion, the Cisco ONS 15310-MA and ONS 15310-CL models represent sophisticated solutions for modern optical networks. With their versatile features, advanced technologies, and robust design, they empower service providers and enterprises to build resilient, high-capacity networks that meet the demands of today’s data-driven world.