Cisco Systems 3750 Series manual

Page 5

Q. Do the Cisco Catalyst 3750 switches have Redundant Power Supply (RPS) support?

A. Yes. The Cisco Catalyst 3750 switches can be supported by the Cisco RPS 675 and the Cisco RPS 300. Both the Cisco RPS 675 and RPS 300 provide superior internal power source redundancy for up to six Cisco networking devices. This results in improved fault tolerance and network uptime. For more information go to:

http://www.cisco.com/en/US/products/hw/accessor/ps2883/products_data_sheet09186a0080150e31.html.

Q. What is the difference between Cisco Redundant Power Supply 675 (RPS 675) and RPS 300?

A.The Cisco RPS 675 is the next-generation of the RPS 300. It provides more power (675W) than RPS 300 (300W). RPS 675 can provide up to 375W of –48V power, and 300W of 12V power. Unlike the Cisco RPS 300, the RPS 675 comes up in active mode. The customer does not need to push a button to activate the RPS 675 after a power failure.

Q.Does it cost more for a Layer 3 or special-features license?

A.The Cisco Catalyst 3750-24TS-E, 3750-48TS-E, 3750G-24T-E, 3750G-24TS-E are loaded with the Enhanced Multilayer Software Image, so all feature license fees are part of the standard list price. However, the Cisco Catalyst 3750-24TS-S, 3750-48TS-S, 3750G-24T-S, 3750G-24TS-S switches are loaded with the Standard Multilayer Software Image; these switches can be upgraded to the Enhanced Multilayer Software Image with the purchase of the Enhanced Multilayer Software Image upgrade kit (part number CD-3750-EMI=). The Standard Multilayer Software Image includes RIP and static routing. For dynamic IP routing features (BGPv4, OSFP, EIGRP, IGRP), the EMI is required.

Q.What features are only supported on the EMI?

A.The following features and functionality are supported with the Enhanced Multilayer Software Image:

Dynamic IP routing protocols for load balancing and constructing scalable LANs:

Open Shortest Path First (OSPF)

Interior Gateway Routing Protocol (IGRP) and Enhanced IGRP (EIGRP)

Border Gateway Protocol (BGPv4)

Equal-cost routing for load balancing and redundancy

Cisco standard and extended IP security Router RACLs for defining security policies on routed interfaces for control plane and data plane traffic

Fallback bridging for forwarding of non-IP traffic between two or more VLANs

Cisco Hot Standby Router Protocol (HSRP) to create redundant failsafe routing topologies

Protocol-Independent Multicast (PIM) for IP multicast routing within a network that enables the network to receive the multicast feed requested and for switches not participating in the multicast to be pruned—support for PIM sparse mode (PIM-SM), PIM dense mode (PIM-DM), and PIM sparse-dense mode

Distance Vector Multicast Routing Protocol (DVMRP) tunneling for interconnecting two multicast-enabled networks across nonmulticast networks

Policy-based Routing (PBR) allows superior control by enabling flow redirection regardless of the routing protocol configured

Cisco Systems, Inc.

All contents are Copyright © 1992–2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.

Page 5 of 10

Image 5
Contents 3750-48 Product OverviewCisco Catalyst 3750G-24TS 3750-243750G-24T Technology Overview Page Security Intelligent SwitchingNetwork Management Positioning Service and WarrantyLimited Lifetime Warranty Technical Support Service Software UpdatesAdvanced Service Product and Contact InformationUSA