Cisco Systems 1900, 2820 manual Using Previous Releases of the Switch Firmware, Supported Browsers

Page 2

Using Previous Releases of the Switch Firmware

Using Previous Releases of the Switch Firmware

The Catalyst 1900 and Catalyst 2820 switches are shipped with firmware version 9.00.05. Depending on the board version of your switch, you need the minimum firmware releases listed in Table 1.

The “System Revision” field on the System Configuration menu displays the board revision of your switch. When you use the show version command from the command-line interface (CLI), the “Hardware Board Revision Is” field displays the board revision.

The Firmware Configuration Menu and the Console and Upgrade Configuration page display the firmware version in use.

Table 1

Supported Firmware on the Catalyst 1900 and Catalyst 2820 Switches

 

 

 

 

 

Board

 

 

 

 

Revision

 

Switch

Supported Firmware Version

 

 

 

 

 

1

 

Catalyst 1900-A

6.x or later

 

 

Catalyst 1900-EN

 

 

 

 

 

 

 

1

 

Catalyst 2820-A

6.x or later

 

 

Catalyst 2820-EN

 

 

 

 

 

 

 

4

 

Catalyst 1900-A

8.00.04 or later

 

 

Catalyst 1900-EN

 

 

 

 

 

 

 

5

 

Catalyst 1900-A

8.01.00 or later

 

 

Catalyst 1900-EN

 

 

 

 

 

 

 

5

 

Catalyst 2820-A

8.01.01 or later

 

 

Catalyst 2820-EN

 

 

 

 

 

 

 

Supported Browsers

To use the Catalyst 1900 or Catalyst 2820 Switch Manager, you must have one of these web browsers installed on your management station:

Table 2

Browser Support for Web-Based Management

 

 

 

 

 

Browser

 

Minimum Version

Supported Version

 

 

 

Netscape Communicator

4.5

4.5, 4.51, 4.61

 

 

 

Microsoft Internet Explorer

4.01a

4.01a, 5.0

 

 

 

 

Note Netscape Communicator 4.60 is not a supported browser. Microsoft Internet Explorer is not a supported browser on Solaris 2.5.1 or later operating systems.

For information about configuring your browsers, refer to the Catalyst 1900 Series Installation and Configuration Guide and the Catalyst 2820 Series Installation and Configuration Guide.

Release Notes for the Catalyst 1900 and Catalyst 2820 Series Switches, Version 9.00.06

2

OL-2901-01

 

 

Image 2
Contents Contents Using Previous Releases of the Switch Firmware Supported BrowsersFeatures Limitations Limitation Specific to the Catalyst 2820 SwitchesUsage Guidelines Specific to the Catalyst 1900 Switches Usage GuidelinesUsage Guidelines Specific to the Catalyst 2820 Switches Usage Guidelines Caveats Open CaveatsCaveats Caveats Resolved Caveats in Version Resolved Caveats in Previous Versions Caveats World Wide Web Related DocumentationObtaining Documentation Documentation CD-ROMObtaining Technical Assistance Ordering DocumentationDocumentation Feedback Cisco.com Technical Assistance CenterCisco TAC Web Site