Cisco Systems 15454 specifications MXPMR2.5G, MXPPMR2.5G

Page 11

Chapter 2 Cards Specifications

2.1 Card Overview

Table 2-5

Cisco ONS 15454 DWDM Cards (continued)

 

 

 

 

Card

 

Part Number

Description

 

 

 

 

MXP_2.5G_10E

 

15454-10ME-xx.x=

The 2.5 Gbps-10 Gbps Muxponder-100 GHz-Tunable xx.xx-xx.xx

 

 

 

(MXP_2.5G_10E) card has nine sets of ports located on the faceplate

 

 

 

and can be installed in Slots 1 through 6 and 12 through 17. It is a

 

 

 

DWDM muxponder for the ONS 15454 platform that supports full

 

 

 

optical transparency on the client side. The card multiplexes four 2.5

 

 

 

Gbps client signals (4 x OC48/STM-16 SFP) into a single 10-Gbps

 

 

 

DWDM optical signal on the trunk side. The MXP_2.5G_10E card

 

 

 

provides wavelength transmission service for the four incoming 2.5

 

 

 

Gbps client interfaces. It passes all SONET overhead bytes

 

 

 

transparently. Each version of this card has a different part number.

 

 

 

The MXP_2.5G_10E works with Optical Transparent Network (OTN)

 

 

 

devices defined in ITU-T G.709. The card supports Optical Data

 

 

 

Channel Unit 1 (ODU1) to Optical Channel Transport Unit (OTU2)

 

 

 

multiplexing, an industry standard method for asynchronously

 

 

 

mapping a SONET/SDH payload into a digitally wrapped envelope.

 

 

 

The MXP_2.5G_10E card is tunable over four neighboring

 

 

 

wavelengths in the 1550 nm, ITU 100-GHz range. It is available in

 

 

 

eight different versions, covering thirty-two different wavelengths in

 

 

 

the 1550 nm range. It is not compatible with the MXP_2.5G_10G

 

 

 

card, which does not supports full optical transparency. The faceplate

 

 

 

designation of the card is “4x2.5G 10E MXP.”

 

 

 

MXP_2.5G_10E-C

15454-10ME-C=

This muxponder has the same features as the MXP_2.5G_10E card,

 

 

 

but its trunk interface can be tuned over the entire C band.

 

 

 

MXP_2.5G_10E-L

15454-10ME-L=

This muxponder has the same features as the MXP_2.5G_10E card,

 

 

 

but its trunk interface can be tuned over the entire L band.

 

 

 

 

MXP_MR_2.5G

 

15454-Datamux2.5GDM

The MXP_MR_2.5G card has nine sets of ports located on the

 

 

 

faceplate. The MXP_MR_2.5G card aggregates a mix and match of

 

 

 

client Storage Area Network (SAN) service client inputs (GE,

 

 

 

FICON, Fibre Channel, and ESCON) into one 2.5 Gbps

 

 

 

STM-16/OC-48 DWDM signal on the trunk side. It provides one

 

 

 

long-reach STM-16/OC-48 port per card and is compliant with

 

 

 

Telcordia GR-253-CORE.

 

 

 

MXPP_MR_2.5G

15454-Datamux2.5GDMP

The MXPP_MR_2.5G card has ten sets of ports located on the

 

 

 

faceplate. The 2.5-Gbps Multirate Muxponder-Protected-100

 

 

 

GHz-Tunable 15xx.xx-15yy.yy (MXPP_MR_2.5G) card aggregates

 

 

 

various client SAN service client inputs (GE, FICON, Fibre Channel,

 

 

 

and ESCON) into one 2.5 Gbps STM-16/OC-48 DWDM signal on the

 

 

 

trunk side. It provides two long-reach STM-16/OC-48 ports per card

 

 

 

and is compliant with ITU-T G.957 and Telcordia GR-253-CORE.

 

 

 

 

Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x

 

July 2006

2-11

 

 

 

Image 11
Contents Cards Specifications Band IDs Add/Drop Channel IDs Add/Drop Wavelengths nm AD-4C-xx.x Channel Sets Band IDs Add/Drop Channel IDs Add/Drop Wavelengths nm OPT-PRE Card Part Number DescriptionOscm OSC-CSM32MUX-O OPT-BST-EOPT-BST-L OPT-AMP-LCisco ONS 15454 Dwdm Engineering and Planning Guide, Release TXPMR10G 32WSS32WSS-L MMUTXPMR2.5G TXPMR10ETXPMR10E-C TXPMR10E-LTXPPMR2.5G MXPPMR2.5G MXPMR2.5GMXPMR10DMEL Common Control Cards1.1 TCC2 Card MXPMR10DMECTCC2 Block Diagram and Faceplate 1.2 TCC2P Card 2shows the faceplate and block diagram for the TCC2P cardTCC2P Block Diagram and Faceplate MS-ISC-100T Card MS-ISC-100T Faceplate and Block Diagram Parameter Condition Min Max Unit Optical Service Channel CardsCOM Line PMD Optical Add and Drop Cards3.1 32WSS Card Line OSC COMMax Unit Parameter Condition MinParameter Condition Min Typical Max 3.2 32WSS-L CardParameter Condition Min Typical Max Unit 3.3 32DMX CardPDL 3.4 32DMX-L CardOUT 12defines the optical parameters for the 32MUX-O card 3.5 32MUX-O CardParameter Min Typical Max Unit 3.6 32DMX-O Card14defines optical parameters for the 4MD-xx.xx card 3.7 4MD-xx.x CardOptical Parameters Value Band Oadm Filter CardsAD-2C-xx.x Card Optical Parameters COM RX = MMU CardEXP a RX = COM TXEXP B RX Optical AmplifiersEXP RX = EXP a RX EXP RX = EXP B RXParameter Comment Min OPT-PRE CardParameter Comment Min Typical Max Unit OPT-BST and OPT-BST-E CardsFor detailed Pin-Pout power mask Single channel see DBm OPT-BST-E Card Standard and Extended Gain Range OPT-BST-L CardOPT-BST-L Card Standard and Extended Gain Range OPT-AMP-L Card OPT-BST-L Card Functional Block DiagramOsri ALS 10 OPT-AMP-L Card Standard and Extended Gain Range Receive Section Dispersion Compensation UnitsLeaf Fiber DCU Description BandUnits Specifications DCU Mechanical SpecificationsDCU Optical Specifications Wavelength nm Ch Tunable Transponder, Muxponder, and Optical CardsDwdm 2.5-Gbps Dwdm 10-Gbps Dwdm 10-Gbps TXP/MXP Full C-BandTXP/MXP TXP/MXP Wavelength nm Ch Tunable Full L-Band Tunable Cards Channel nm Frequency THz 6.1 OC48 ITU-T OpticsBand Spectrum Band Spectrum 6.2 OC192 ITU-T Optics Client Side Interfaces ONS-SE-2G-S1 SFP-GEFC-SX 15454E-SFP-GEFC-SXFicon 1G Ficon 2G10GBASE-LR ONS-XC-10G-S1 Cable ModuleClient Interface SFP/XFP 10GBASE-LRParameter Conditions Min Parameter Conditions Min Typical MaxDispersion Compensation Shelf Mechanical EquipmentBay Frame Optical Shelf8.6 32 Channel Patch-Panel Trays Fiber Storage15 32-Channel Patch Panel Shelf Fiber Routing
Related manuals
Manual 12 pages 4.75 Kb

15454 specifications

Cisco Systems' 15454 is a leading optical networking platform designed to address a range of connectivity needs for service providers, enterprises, and data centers. As part of the Cisco ONS (Optical Networking System) portfolio, the 15454 provides advanced capabilities that cater to the evolving demands of high-performance network requirements.

At its core, the Cisco 15454 is built for scalability and versatility. It supports a variety of transmission methods, including SONET (Synchronous Optical Networking), SDH (Synchronous Digital Hierarchy), and WDM (Wavelength Division Multiplexing). This flexibility makes the platform ideal for deploying both legacy services and next-generation applications.

One of the standout features of the 15454 is its ability to support high-capacity wavelengths, allowing for greater bandwidth utilization across fiber networks. With advanced Dense Wavelength Division Multiplexing (DWDM) technology, the platform ensures efficient use of the available fiber and extends the distance over which data can be transmitted. This results in reduced operational costs while maximizing throughput.

The Cisco 15454 also comes equipped with an array of interfaces supported by its modular design. The platform can accommodate Ethernet, SONET/SDH, and IP services, which means it can seamlessly handle a wide range of protocols. The modular architecture allows network operators to tailor the system to their specific requirements, offering a variety of line cards and interfaces to choose from.

Another critical characteristic of the 15454 is its built-in protection mechanisms. The system offers diverse and automatic protection schemes such as optical Layer 1 protection, ensuring high availability and network resilience. This capability is essential for mission-critical applications where uptime is paramount.

Moreover, the platform is complemented by Cisco's sophisticated management solutions, which streamline the operational management of the network. With tools that provide in-depth monitoring and troubleshooting capabilities, network administrators can maintain optimal performance and quickly respond to any issues that may arise.

In summary, the Cisco Systems 15454 is a robust and adaptable optical networking solution. Its main features, including advanced DWDM capabilities, modular architecture, protocol versatility, and enhanced protection mechanisms, make it a preferred choice for organizations looking to scale their network infrastructure while ensuring high service reliability and performance. Whether for expanding bandwidth or modernizing legacy networks, the Cisco 15454 stands out as a powerful tool in the ever-evolving landscape of telecommunications.