Cisco Systems 15454 specifications Client Side Interfaces

Page 49

Chapter 2 Cards Specifications

2.2.6 Transponder, Muxponder, and Optical Cards

Table 2-32

OC192 ITU-T Channels Available for the ONS 15454 (continued)

 

 

C-Band Spectrum

 

 

 

15454 OC192 LR 100 GHz ITU-T

 

 

Cards 1

 

Channel (nm)

Frequency (THz)

X

 

1556.55

192.6

 

 

 

 

X

 

1558.17

192.4

 

 

 

 

X

 

1558.98

192.3

 

 

 

 

X

 

1559.79

192.2

 

 

 

 

X

 

1560.61

192.1

 

 

 

 

1. These wavelengths are shorter lead-time cards and are recommended for deployment.

The ONS 15454 offers eight OC192 ITU-T cards. Each card provides a long-reach SONET compliant 9.95328 Gbps high-speed interface operating at a 100-GHz spaced, ITU-T compliant wavelength within the 1530 to 1562 nm frequency band. The primary application for the OC192 ITU-T card is for use in ultra high-speed metro interoffice facility (IOF) solutions interconnecting central offices and collocation sites over a DWDM-based transport network.

2.2.6.3 Client Side Interfaces

The TXP and MXP cards utilize small form-factor pluggables (SFPs) and 10-Gigabit SFPs (XFPs) to accommodate various client interface payloads. The SFP and XFP modules are inserted into matching connectors on the front panels of the cards and then connected to the client equipment with fiber-optic cables. Table 2-33shows the SFP and XFP pluggable client modules available for each client service type.

Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x

 

July 2006

2-49

 

 

 

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Cards Specifications Band IDs Add/Drop Channel IDs Add/Drop Wavelengths nm AD-4C-xx.x Channel Sets Band IDs Add/Drop Channel IDs Add/Drop Wavelengths nm Oscm Card Part Number DescriptionOSC-CSM OPT-PREOPT-BST-L OPT-BST-EOPT-AMP-L 32MUX-OCisco ONS 15454 Dwdm Engineering and Planning Guide, Release 32WSS-L 32WSSMMU TXPMR10GTXPMR10E-C TXPMR10ETXPMR10E-L TXPMR2.5GTXPPMR2.5G MXPPMR2.5G MXPMR2.5G1.1 TCC2 Card Common Control CardsMXPMR10DMEC MXPMR10DMELTCC2 Block Diagram and Faceplate 1.2 TCC2P Card 2shows the faceplate and block diagram for the TCC2P cardTCC2P Block Diagram and Faceplate MS-ISC-100T Card MS-ISC-100T Faceplate and Block Diagram Parameter Condition Min Max Unit Optical Service Channel Cards3.1 32WSS Card Optical Add and Drop CardsLine OSC COM COM Line PMDMax Unit Parameter Condition MinParameter Condition Min Typical Max 3.2 32WSS-L CardParameter Condition Min Typical Max Unit 3.3 32DMX CardOUT 3.4 32DMX-L CardPDL 12defines the optical parameters for the 32MUX-O card 3.5 32MUX-O CardParameter Min Typical Max Unit 3.6 32DMX-O Card14defines optical parameters for the 4MD-xx.xx card 3.7 4MD-xx.x CardOptical Parameters Value Band Oadm Filter CardsAD-2C-xx.x Card Optical Parameters EXP a RX = MMU CardCOM TX COM RX =EXP RX = EXP a RX Optical AmplifiersEXP RX = EXP B RX EXP B RXParameter Comment Min OPT-PRE CardParameter Comment Min Typical Max Unit OPT-BST and OPT-BST-E CardsFor detailed Pin-Pout power mask Single channel see DBm OPT-BST-E Card Standard and Extended Gain Range OPT-BST-L CardOPT-BST-L Card Standard and Extended Gain Range OPT-AMP-L Card OPT-BST-L Card Functional Block DiagramOsri ALS 10 OPT-AMP-L Card Standard and Extended Gain Range Receive Section Dispersion Compensation UnitsLeaf Fiber DCU Description BandDCU Optical Specifications DCU Mechanical SpecificationsUnits Specifications Dwdm 2.5-Gbps Dwdm 10-Gbps Dwdm 10-Gbps TXP/MXP Transponder, Muxponder, and Optical CardsFull C-Band Wavelength nm Ch TunableTXP/MXP TXP/MXP Wavelength nm Ch Tunable Full L-Band Tunable Band Spectrum 6.1 OC48 ITU-T OpticsCards Channel nm Frequency THz Band Spectrum 6.2 OC192 ITU-T Optics Client Side Interfaces Ficon 1G SFP-GEFC-SX 15454E-SFP-GEFC-SXFicon 2G ONS-SE-2G-S1Client Interface SFP/XFP Cable Module10GBASE-LR 10GBASE-LR ONS-XC-10G-S1Parameter Conditions Min Parameter Conditions Min Typical MaxBay Frame Mechanical EquipmentOptical Shelf Dispersion Compensation Shelf8.6 32 Channel Patch-Panel Trays Fiber Storage15 32-Channel Patch Panel Shelf Fiber Routing
Related manuals
Manual 12 pages 4.75 Kb

15454 specifications

Cisco Systems' 15454 is a leading optical networking platform designed to address a range of connectivity needs for service providers, enterprises, and data centers. As part of the Cisco ONS (Optical Networking System) portfolio, the 15454 provides advanced capabilities that cater to the evolving demands of high-performance network requirements.

At its core, the Cisco 15454 is built for scalability and versatility. It supports a variety of transmission methods, including SONET (Synchronous Optical Networking), SDH (Synchronous Digital Hierarchy), and WDM (Wavelength Division Multiplexing). This flexibility makes the platform ideal for deploying both legacy services and next-generation applications.

One of the standout features of the 15454 is its ability to support high-capacity wavelengths, allowing for greater bandwidth utilization across fiber networks. With advanced Dense Wavelength Division Multiplexing (DWDM) technology, the platform ensures efficient use of the available fiber and extends the distance over which data can be transmitted. This results in reduced operational costs while maximizing throughput.

The Cisco 15454 also comes equipped with an array of interfaces supported by its modular design. The platform can accommodate Ethernet, SONET/SDH, and IP services, which means it can seamlessly handle a wide range of protocols. The modular architecture allows network operators to tailor the system to their specific requirements, offering a variety of line cards and interfaces to choose from.

Another critical characteristic of the 15454 is its built-in protection mechanisms. The system offers diverse and automatic protection schemes such as optical Layer 1 protection, ensuring high availability and network resilience. This capability is essential for mission-critical applications where uptime is paramount.

Moreover, the platform is complemented by Cisco's sophisticated management solutions, which streamline the operational management of the network. With tools that provide in-depth monitoring and troubleshooting capabilities, network administrators can maintain optimal performance and quickly respond to any issues that may arise.

In summary, the Cisco Systems 15454 is a robust and adaptable optical networking solution. Its main features, including advanced DWDM capabilities, modular architecture, protocol versatility, and enhanced protection mechanisms, make it a preferred choice for organizations looking to scale their network infrastructure while ensuring high service reliability and performance. Whether for expanding bandwidth or modernizing legacy networks, the Cisco 15454 stands out as a powerful tool in the ever-evolving landscape of telecommunications.
Top Page Image Contents