Cisco Systems 15454 specifications Opt-Bst-E, Opt-Bst-L, Opt-Amp-L, 32MUX-O, 32DMX-O, 32DMX-L

Page 6

Chapter 2 Cards Specifications

2.1 Card Overview

Table 2-5

Cisco ONS 15454 DWDM Cards (continued)

 

 

 

 

Card

 

Part Number

Description

 

 

 

 

OPT-BST-E

 

15454-OPT-BST-E=

The OPT-BST-E card is designed to support up to 64 channels at

 

 

 

50 GHz channel spacing. It is a C-band DWDM EDFA with OSC

 

 

 

add-and-drop capability. Its maximum output power is 21 dBm. To

 

 

 

control the gain tilt, the OPT-BST-E is equipped with a built-in VOA.

 

 

 

You can install the OPT-BST-E in Slots 1 to 6 and 12 to 17 when the

 

 

 

ONS 15454 is configured in a DWDM network.

 

 

 

 

OPT-BST-L

 

15454-OPT-BST-L=

The OPT-BST-L card is designed to support up to 64 channels at

 

 

 

50 GHz channel spacing. It is an L-band DWDM EDFA with OSC

 

 

 

add-and-drop capability. Its maximum output power is 17 dBm. To

 

 

 

control the gain tilt, the OPT-BST-L is equipped with a built-in VOA.

 

 

 

You can install the OPT-BST-L in Slots 1 to 6 and 12 to 17 when the

 

 

 

ONS 15454 is configured in a DWDM network.

 

 

 

 

OPT-AMP-L

 

15454-OPT-AMP-L=

The OPT-AMP-L card is designed to support 64 channels at 50 GHz

 

 

 

channel spacing. The OPT-AMP-L is a L-band DWDM, two-stage

 

 

 

EDFA with MAL for allocation to a DCU. Its maximum output power

 

 

 

is 20 dBm. To control the gain tilt, the OPT-AMP-L is equipped with

 

 

 

a built-in VOA. The VOA can also be used to pad the DCU to a

 

 

 

reference value. OPT-AMP-L is a double-slot card. You can install the

 

 

 

OPT-AMP-L in Slots 1-2, 3-4, 5-6, or in Slots 12-13, 14-15, or 16-17.

 

 

 

Multiplexer and Demultiplexer Cards

 

 

 

 

 

32MUX-O

 

15454-32MUX-O=

The 32MUX-O card multiplexes 32 100 GHz-spaced channels

 

 

 

identified in the channel plan. The 32MUX-O card takes up two slots

 

 

 

in an ONS 15454 DWDM and can be installed in Slots 1 to 5 and 12

 

 

 

to 16.

 

 

 

 

32DMX-O

 

15454-32DMX-O=

The 32DMX-O card demultiplexes 32 100-GHz-spaced channels

 

 

 

identified in the channel plan. The 32DMX-O takes up two slots in an

 

 

 

ONS 15454 DWDM and can be installed in Slots 1 to 5 and 12 to 16.

 

 

 

 

32DMX

 

15454-32DMX=

The 32DMX card is a single-slot optical demultiplexer. The card

 

 

 

receives an aggregate optical signal on its COM RX port and

 

 

 

demultiplexes it into to 32 100-GHz-spaced channels. The 32DMX

 

 

 

card can be installed in Slots 1 to 6 and in Slots 12 to 17.

 

 

 

 

32DMX-L

 

15454-32DMX-L=

The 32DMX-L card is a single-slot optical L-band demultiplexer. The

 

 

 

card receives an aggregate optical signal on its COM RX port and

 

 

 

demultiplexes it into to 32 100 GHz-spaced channels. The 32DMX

 

 

 

card can be installed in Slots 1 to 6 and in Slots 12 to 17.

 

 

 

 

4MD-xx.x

 

15454-4MD-xx.x=

The 4MD-xx.x card multiplexes and demultiplexes four

 

 

 

100 GHz-spaced channels identified in the channel plan. The

 

 

 

4MD-xx.x card is designed to be used with band OADMs (both

 

 

 

AD-1B-xx.x and AD-4B-xx.x). There are eight versions of this card

 

 

 

that correspond with the eight subbands specified in Table 2-1 on

 

 

 

page 2-2. The 4MD-xx.x can be installed in Slots 1 to 6 and 12 to 17

 

 

 

when the ONS 15454 is configured in a DWDM network.

 

 

 

Optical Add/Drop Multiplexer Cards

 

 

 

 

 

Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x

2-6

July 2006

 

 

Image 6
Contents Cards Specifications Band IDs Add/Drop Channel IDs Add/Drop Wavelengths nm AD-4C-xx.x Channel Sets Band IDs Add/Drop Channel IDs Add/Drop Wavelengths nm OSC-CSM Card Part Number DescriptionOscm OPT-PREOPT-AMP-L OPT-BST-EOPT-BST-L 32MUX-OCisco ONS 15454 Dwdm Engineering and Planning Guide, Release MMU 32WSS32WSS-L TXPMR10GTXPMR10E-L TXPMR10ETXPMR10E-C TXPMR2.5GTXPPMR2.5G MXPMR2.5G MXPPMR2.5GMXPMR10DMEC Common Control Cards1.1 TCC2 Card MXPMR10DMELTCC2 Block Diagram and Faceplate 2shows the faceplate and block diagram for the TCC2P card 1.2 TCC2P CardTCC2P Block Diagram and Faceplate MS-ISC-100T Card MS-ISC-100T Faceplate and Block Diagram Optical Service Channel Cards Parameter Condition Min Max UnitLine OSC COM Optical Add and Drop Cards3.1 32WSS Card COM Line PMDParameter Condition Min Max Unit3.2 32WSS-L Card Parameter Condition Min Typical Max3.3 32DMX Card Parameter Condition Min Typical Max Unit3.4 32DMX-L Card OUTPDL 3.5 32MUX-O Card 12defines the optical parameters for the 32MUX-O card3.6 32DMX-O Card Parameter Min Typical Max Unit3.7 4MD-xx.x Card 14defines optical parameters for the 4MD-xx.xx cardBand Oadm Filter Cards Optical Parameters ValueAD-2C-xx.x Card Optical Parameters COM TX MMU CardEXP a RX = COM RX =EXP RX = EXP B RX Optical AmplifiersEXP RX = EXP a RX EXP B RXOPT-PRE Card Parameter Comment MinOPT-BST and OPT-BST-E Cards Parameter Comment Min Typical Max UnitFor detailed Pin-Pout power mask Single channel see DBm OPT-BST-L Card OPT-BST-E Card Standard and Extended Gain RangeOPT-BST-L Card Standard and Extended Gain Range OPT-BST-L Card Functional Block Diagram OPT-AMP-L CardOsri ALS 10 OPT-AMP-L Card Standard and Extended Gain Range Dispersion Compensation Units Receive SectionFiber DCU Description Band LeafDCU Mechanical Specifications DCU Optical SpecificationsUnits Specifications Full C-Band Transponder, Muxponder, and Optical CardsDwdm 2.5-Gbps Dwdm 10-Gbps Dwdm 10-Gbps TXP/MXP Wavelength nm Ch TunableTXP/MXP TXP/MXP Wavelength nm Ch Tunable Full L-Band Tunable 6.1 OC48 ITU-T Optics Band SpectrumCards Channel nm Frequency THz Band Spectrum 6.2 OC192 ITU-T Optics Client Side Interfaces Ficon 2G SFP-GEFC-SX 15454E-SFP-GEFC-SXFicon 1G ONS-SE-2G-S110GBASE-LR Cable ModuleClient Interface SFP/XFP 10GBASE-LR ONS-XC-10G-S1Parameter Conditions Min Typical Max Parameter Conditions MinOptical Shelf Mechanical EquipmentBay Frame Dispersion Compensation ShelfFiber Storage 8.6 32 Channel Patch-Panel Trays15 32-Channel Patch Panel Shelf Fiber Routing
Related manuals
Manual 12 pages 4.75 Kb

15454 specifications

Cisco Systems' 15454 is a leading optical networking platform designed to address a range of connectivity needs for service providers, enterprises, and data centers. As part of the Cisco ONS (Optical Networking System) portfolio, the 15454 provides advanced capabilities that cater to the evolving demands of high-performance network requirements.

At its core, the Cisco 15454 is built for scalability and versatility. It supports a variety of transmission methods, including SONET (Synchronous Optical Networking), SDH (Synchronous Digital Hierarchy), and WDM (Wavelength Division Multiplexing). This flexibility makes the platform ideal for deploying both legacy services and next-generation applications.

One of the standout features of the 15454 is its ability to support high-capacity wavelengths, allowing for greater bandwidth utilization across fiber networks. With advanced Dense Wavelength Division Multiplexing (DWDM) technology, the platform ensures efficient use of the available fiber and extends the distance over which data can be transmitted. This results in reduced operational costs while maximizing throughput.

The Cisco 15454 also comes equipped with an array of interfaces supported by its modular design. The platform can accommodate Ethernet, SONET/SDH, and IP services, which means it can seamlessly handle a wide range of protocols. The modular architecture allows network operators to tailor the system to their specific requirements, offering a variety of line cards and interfaces to choose from.

Another critical characteristic of the 15454 is its built-in protection mechanisms. The system offers diverse and automatic protection schemes such as optical Layer 1 protection, ensuring high availability and network resilience. This capability is essential for mission-critical applications where uptime is paramount.

Moreover, the platform is complemented by Cisco's sophisticated management solutions, which streamline the operational management of the network. With tools that provide in-depth monitoring and troubleshooting capabilities, network administrators can maintain optimal performance and quickly respond to any issues that may arise.

In summary, the Cisco Systems 15454 is a robust and adaptable optical networking solution. Its main features, including advanced DWDM capabilities, modular architecture, protocol versatility, and enhanced protection mechanisms, make it a preferred choice for organizations looking to scale their network infrastructure while ensuring high service reliability and performance. Whether for expanding bandwidth or modernizing legacy networks, the Cisco 15454 stands out as a powerful tool in the ever-evolving landscape of telecommunications.