Front Panel Description
Figure 1-2 Front Panel Port Connectors
H10260
RPS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1x | 2x | 3x | 4x | 5x | 6x | 7x | 8x |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 9x | 10x | 11x | 12x | 13x | 14x | 15x | 16x |
| |||
|
|
|
|
|
|
|
|
| 16 | |||||||
MODE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
100BaseTX ports | 100BaseTX |
| uplink port |
Ports 1x through 16x have their transmit (TD) and receive (RD) pairs internally crossed. Standard Category 5 UTP crossover cable is required when connecting these ports to another hub, switch, or router (unless you are connecting to the uplink port on another FastHub or 100BaseT hub).
Port 16, which is to the right of port 16x, is the 100BaseTX uplink port. This uplink port is not internally crossed. Standard Category 5 UTP
Caution You will disable both ports if you connect to both the uplink port (port 16) and port 16x.
For more information on connecting to these ports, see the “Connecting from the 100BaseTX Ports on the FastHub” section in the “Installing the FastHub” chapter.
Overview