Cisco Systems WAVE594K9, 694 manual Symptom FRU or Action, Console Port Connector section on

Page 70

Chapter 6 Troubleshooting the System Hardware

Error Symptoms

Table 6-7

Power Problems

 

 

 

 

Symptom

 

FRU or Action

 

 

 

The power-control button does

1.

Verify the following items:

not work (the appliance does

 

a. The power cables are properly connected to the appliance.

not start).

 

 

 

 

b. The electrical outlet functions properly.

Note The power-control

 

2.

If you just installed a hardware option, remove it, and restart the

button will not

function until 20

 

appliance.

seconds after the

3.

See the “Undetermined Problems” section on page 6-4.

appliance has been

 

 

connected to power.

 

 

 

 

The appliance does not power

1. Turn off the appliance by pressing the power-control button for 5

down.

 

 

seconds.

 

 

2.

Restart the appliance.

 

 

3.

If the power-control button does not work, disconnect the power

 

 

 

cord for 20 seconds. Reconnect the power cord and restart the

 

 

 

appliance.

 

 

The appliance unexpectedly

See the “Undetermined Problems” section on page 6-4.

shuts down, and the LEDs on

 

 

the operator information panel

 

 

are not lit.

 

 

 

 

 

 

Table 6-8

Console Port Problems

 

 

 

Symptom

 

FRU or Action

 

 

A console connection does not

1. Verify that the console device is connected to the correct port (see

work. For more information

 

the “Console Port Connector” section on page 1-6).

about the console port, see the

2.

If using the mini-USB console port, verify that the driver has been

“Console Port Connector”

 

installed (see the “Console Port Connector” section on page 1-6).

section on page 1-6.

 

 

 

 

 

 

 

Cisco Wide Area Virtualization Engine 594 and 694 Hardware Installation Guide

6-8

OL-24619-02

 

 

Image 70
Contents Cisco Systems, Inc Page N T E N T S Installing Hardware Options for the WAVE-594 and WAVE-6944-1 Humidity Altitude B-2 OL-24619-02 Purpose PrefaceAudience Chapter Title Description OrganizationConventions Convention DescriptionScreen examples use the following conventions OL-24619-02 Page Xii Related Documentation XiiiObtaining Documentation and Submitting a Service Request Introducing the Cisco Wide Area Virtualization Engine 594 Hardware FeaturesSupported Products Front Panel Components and LEDs 1shows the front panel componentsLED Color State DescriptionBack Panel Components and LEDs 3shows the back panel componentsLocation of Ports and Connectors Ethernet Port ConnectorsInstalling the Cisco USB Driver Connecting a Console TerminalCabling Softwareid=280836712 OL-24619-02 Preparing to Install the WAVE-594 and WAVE-694 Safety Warnings and CautionsSafety Guidelines General Precautions,Page General Precautions System Reliability Considerations Understanding the Environmental RequirementsProtecting Against Electrostatic Discharge Understanding the Power Requirements Understanding the Grounding RequirementsInstalling the WAVE-594 and WAVE-694 Rack-Mounting Considerations, Parts, and ToolsRack Type Name Description Qty PostMounting in a 4-Post Rack Attaching the BracketsAttaching Rear Rack Mount to the Rack Front-Mounting in a 2-Post Rack Rack-Mounting the ChassisAttaching the Front Brackets Cabling Connecting Power and Booting the System Checking the LEDsRemoving or Replacing a Wave Appliance OL-24619-02 Installing Hardware Options for the WAVE-594 and WAVE-694 Installing a Cisco Wave Interface ModuleReplacing a Hard Disk Drive/Solid State Drive Interface Module-RemovalPress the button and swing the handle out. See Figure Replacing a Fan Replacing a Power Supply Remove the power cord from the power supplyInstalling Memory Removing the CoverInstalling Memory Modules 5shows the memory slot mapping on the system boardSlot A3 Slot A2 Slot A1 Slot B3 Slot B2 Slot B1 Memory Slot MappingInstalling an Rdimm OL-24619-02 Interface Module Descriptions Wave Interface ModulesGigabit Ethernet Interface Module-Copper Gigabit Ethernet Interface Module-Fiber Optic Gigabit Ethernet Interface Module-4-Port CopperGigabit Ethernet Interface Module-Fiber Optic SFP+ Gigabit Ethernet Interface Module-4-Port Fiber OpticInline Interface Ports and LED Indicators Name Color State Description2describes the Gigabit Ethernet port LEDs LEDs Gigabit Ethernet-Copper Network Adapter Cabling RequirementsConnection Required Cable Cable Requirements for Wave Connections Using Fast Ethernet Gigabit Ethernet-Fiber Optic Wave WAN 12 Cabling Between Two Inline WAVEs OL-24619-02 OL-24619-02 Troubleshooting the System Hardware Identifying System ProblemsChecking Connections and Switches Troubleshooting the Ethernet ControllerNetwork Connection Problems Ethernet Controller Troubleshooting ChartUndetermined Problems Ethernet Controller Problem ActionsProblem-Solving Tips Error Symptoms Symptom Cause and ActionSee the Undetermined Problems section on Symptom FRU or Action Console Port Connector section onAppliance Specifications WAVE-594 and WAVE-694 Hardware SpecificationsSpecification Description Specification Description Interface Module Specifications Cisco 10GBASE SFP+ ModulesSpecification Description Maintaining the WAVE-594 and WAVE-694 Maintaining Your Site EnvironmentHumidity TemperatureAltitude Corrosion Dust and ParticlesElectrostatic Discharge Magnetism Electromagnetic and Radio Frequency InterferenceShock and Vibration Using Power Protection Devices Power Source InterruptionsSurge Protectors Uninterruptible Power SuppliesLine Conditioners D E IN-2 IN-3 IN-4
Related manuals
Manual 6 pages 6.06 Kb

694, WAVE594K9 specifications

Cisco Systems WAVE594K9 is a state-of-the-art application delivery controller (ADC) that is designed to optimize the performance and availability of applications across a wide area network. As part of Cisco’s advanced networking solutions, the WAVE594K9 effectively enhances application delivery, ensuring a seamless user experience even under heavy traffic conditions.

One of the primary features of the WAVE594K9 is its ability to provide comprehensive traffic management. This device intelligently load balances incoming requests and distributes them across multiple servers. By optimizing resource allocation, it minimizes response times and maximizes throughput, which is particularly beneficial for organizations dealing with fluctuating traffic patterns.

The WAVE594K9 also excels in application acceleration. This is achieved through various optimization techniques, including compression and caching. By reducing the size of transmitted data and storing frequently accessed content closer to users, the WAVE594K9 significantly speeds up application delivery. As a result, businesses can ensure that their users experience minimal latency, even when accessing resource-intensive applications.

Security is another key characteristic of the WAVE594K9. It integrates advanced security features, such as application layer firewalls, SSL offload capabilities, and DDoS protection. These built-in security measures not only safeguard sensitive data but also improve performance by offloading decryption tasks from application servers, allowing them to focus on processing actual requests.

Moreover, the WAVE594K9 is equipped with robust monitoring and reporting tools. Administrators can gain real-time insights into application performance, user activity, and traffic patterns. This level of visibility enables proactive management and troubleshooting, which helps in identifying and resolving potential issues before they impact end-users.

In terms of scalability, the WAVE594K9 is designed to grow with an organization’s needs. It can easily be integrated into existing IT infrastructures and expanded as traffic demands increase. This flexibility makes it an ideal solution for businesses of all sizes, from small enterprises to large corporations.

To summarize, the Cisco Systems WAVE594K9 is a powerful ADC that enhances application delivery through intelligent traffic management, application acceleration, built-in security features, and comprehensive monitoring tools. Its ability to scale effectively makes it a strategic investment for ensuring optimal application performance in today’s dynamic IT environments.