Closed Caveats

Caveats

•CSCeh69073 and CSCeh72204—Auto-provisioned PAC does not support unicode usernames

An auto-provisioned PAC is not stored in a user’s private store if he or she logs into Windows with a username containing two-byte characters. Automatic PAC provisioning succeeds, but the PAC does not appear in the Select EAP-FAST PAC window of the private store and therefore cannot be deleted. To work around this problem, go to the global store on your computer (C:\Document and Settings\All Users\Application Data\Cisco\cscostore). You can see the PAC here and delete it if desired.

•CSCeh74184—Client fails to associate when configured for WPA/WPA2 passphrase and multiple SSIDs

The client adapter fails to connect to the network when using a profile that is configured for WPA/WPA2 passphrase and more than one SSID. To work around this problem, create separate profiles for the desired SSIDs.

•CSCeh76770—Removing client adapter causes memory leak

A memory leak occurs if you remove the client adapter while the site survey utility is running.

•CSCeh93701—PEAP (EAP-MSCHAP V2) incompatible with Funk server

ADU’s PEAP (EAP-MSCHAP V2) supplicant is incompatible with the Funk Steel-Belted RADIUS server.

The following caveats, which are listed as open caveats in the Release Notes for Install Wizard 2.1, have been closed and are not resolved in CB21AG and PI21AG client adapter software release 2.5.

•CSCed40520—Up to 5-minute delay for initial boot

Some computers may experience up to a 5-minute delay during the first boot after installation. Subsequent boots are normal.

•CSCee89506—Driver fails to install when using install disk on Windows 2000

When you create a driver installation disk (on a floppy or by storing the files in a folder) using the Install Wizard on a computer running Windows 2000, the driver may fail to install. Specifically, when you install the driver via Windows Device Manager > Driver > Properties > Driver Update Driver, Windows indicates that it has finished installing the driver software. However, the Windows Network and Dial-up Connections window shows the following message: “An unexpected error occurred.” Also, after you reboot the computer, the Windows Device Manager shows an incomplete installation of the driver software. This problem could not be reproduced.

•CSCeh19611 and CSCef20218—Incorrect EAP-FAST authentication failure error message

ADU may show the incorrect error message when EAP-FAST authentication fails. This occurs when the access point returns an incorrect error code rather than timing out.

•CSCeh45986— CB21AG in ACER Travelmate 529TX fails DHCP and LEAP

When the CB21AG client adapter is installed in an ACER Travelmate 529TX running Windows 2000 with Service Pack 4 and configured for static WEP with open authentication, it fails to obtain an IP address through DHCP. In addition, the client adapter also fails to LEAP authenticate.

Release Notes for Cisco Aironet 802.11a/b/g Client Adapters (CB21AG and PI21AG) Install Wizard 2.5

26	OL-8008-01