Cisco Systems DVD-ROM manual Powering Down the Cisco MeetingPlace

Page 4

How to Upgrade to the Cisco MeetingPlace Audio Server Release 5.2 DVD-ROM

Step 4 To save the license keys, enter savelicense.

You can use these license keys if you need to reinstall the original CPU.

Step 5 Remove the disk from the floppy disk drive.

Powering Down the Cisco MeetingPlace 8112

To power down the Cisco MeetingPlace 8112, perform the following steps:

Step 1 At the tech$ prompt, enter halt disable.

Step 2 To power down the system, enter y and press Enter.

Step 3 Wait for the “**** LynxOS is down ****” message to appear.

Step 4 Turn the power switch to the off position.

Step 5 Unplug the main power cable from the server.

Removing the Tape Drive from the Cisco MeetingPlace 8112

To remove the tape drive from the Cisco MeetingPlace 8112, perform the following steps:

Step 1 From the back of the Cisco MeetingPlace 8112, loosen the screws on the floppy disk housing, located on the upper left side.

Step 2 Slowly slide out the floppy disk housing and secure the housing to the back of the

Cisco MeetingPlace 8112 with a releasable tie wrap, as shown in Figure 1.

Figure 1 Secured Floppy Disk Housing

Caution Do not allow the housing to hang by the attached cables.

Cisco MeetingPlace Audio Server Release 5.2 DVD-ROM Upgrade Procedure

4

78-16489-01

 

 

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Contents AudienceScope Required Hardware and SoftwareRequired Hardware and Software Recommended HardwareRequired Tools and Equipment Saving the License KeysPowering Down the Cisco MeetingPlace Removing the Tape Drive from the Cisco MeetingPlacePower Cable Scsi Cable Disconnect the connector at PWR1Power Cable Connector Power Cable Connector on Top Disk DriveInstalling the DVD-ROM Drive into the Cisco MeetingPlace Captive Screws on the Drive BayPidea Receptacle Pidea ReceptacleUpgrading the Cisco MeetingPlace 8112 Bios Bios Setup Utility Main ScreenKey combination to choose Diskette Drive Troubleshooting Bios Upgrade Failure Verifying the Bios UpgradeBios Revision What to Do NextReplacing the CPU and Updating the License Keys Verify that there is a modem line connected to the serverInstalling the DVD-ROM Drive Software Installing the DVD-ROM Software ExamplePassed Recording Conferences with a Cisco MeetingPlace System Additional ReferencesVerifying Cisco MeetingPlace Gateway Functionality Obtaining Documentation Cisco.comDocumentation DVD Ordering DocumentationDocumentation Feedback Reporting Security Problems in Cisco ProductsCisco Product Security Overview Obtaining Technical Assistance Submitting a Service RequestCisco Technical Support Website Definitions of Service Request Severity Obtaining Additional Publications and InformationObtaining Additional Publications and Information

DVD-ROM specifications

Cisco Systems has long been a leader in networking and telecommunications technology, providing a wide array of products and services designed to enhance connectivity and optimize network performance. Among its diverse offerings, the Cisco Systems DVD-ROM stands out as a unique tool that provides users with comprehensive resources, technical documentation, and applications for Cisco's suite of networking solutions.

The Cisco Systems DVD-ROM is designed as a complete multimedia resource, primarily aimed at IT professionals, network administrators, and technical support personnel. One of its main features is the extensive collection of technical manuals and documentation, which covers everything from installation guides to configuration best practices. This wealth of information enables users to gain a deeper understanding of Cisco products and effectively address common networking challenges.

Another notable characteristic of the Cisco Systems DVD-ROM is its compatibility with various operating systems and devices. This ensures that users can seamlessly access content, whether they are using a desktop, laptop, or even certain mobile devices. The DVD-ROM is structured to accommodate a user-friendly interface, which allows for easy navigation through the extensive library of documents and applications. Users can quickly locate the information they need, making troubleshooting and learning more efficient.

In addition to documentation, the DVD-ROM often includes software tools and utilities designed to enhance network management and performance. These tools may feature diagnostic utilities, configuration applications, and system emulators, giving users the ability to experiment with different configurations without impacting live environments. This hands-on approach to learning can be particularly beneficial for individuals preparing for Cisco Certification exams or seeking to expand their technical skill set.

The DVD-ROM is also periodically updated, ensuring that users have access to the latest features, security protocols, and best practices. By providing timely updates, Cisco ensures that professionals stay informed about advancements in networking technologies and can implement the most current solutions within their organizations.

Moreover, the inclusion of multimedia content such as video tutorials and interactive training modules further enhances the learning experience. These resources cater to various learning styles, making complex topics more accessible and engaging.

In summary, the Cisco Systems DVD-ROM serves as an invaluable asset for network professionals. Its combination of comprehensive documentation, software tools, and multimedia resources empowers users to effectively leverage Cisco’s extensive technology portfolio, fostering greater efficiency and proficiency in networking operations. With ongoing updates and a user-friendly interface, the DVD-ROM not only facilitates immediate problem-solving but also supports long-term professional development in the ever-evolving field of networking.
Top Page Image Contents