Cisco Systems DVD-ROM manual Pidea Receptacle

Page 8

How to Upgrade to the Cisco MeetingPlace Audio Server Release 5.2 DVD-ROM

Step 5 If you have to pull out the power cable to connect it to the DVD-ROM drive, make sure that you put the power cable back into the drive bay. Slide the power cable back in as far as possible so that you can access the cable from the back of the server.

Step 6 Slide the DVD-ROM drive into the drive bay. You may not be able to fully insert the DVD-ROM drive because the IDE cable may bunch up.

Step 7 Go to the back of server and carefully straighten out the IDE cable.

Step 8 Verify that the IDE cable clips are open and insert the IDE cable connector to the PIDEA receptacle, located above the PWR1 receptacle, as shown in Figure 7.

When you push in the connector, the top and bottom clips of the receptacle secure the connector.

Figure 7 PIDEA Receptacle

PIDEA Receptacle

Step 9 Reconnect the power cable connector with the red wire on top to the disk drive, located at top left. This connector is keyed and can only be inserted one way.

Step 10 Reconnect the power cable connector with the red wire on top to the PWR1 receptacle. Use a flashlight to ensure proper connection. This connector is keyed and can only be inserted one way.

Caution If you do not reconnect the power cable connector properly, the server will be damaged and will not boot up.

Step 11 Go to the front of the server and insert fully the DVD-ROM drive into the drive bay and tighten the captive screws.

Step 12 Replace the face plate of the drive bay and fasten the four screws.

Step 13 After completing the installation, verify all the connections.

Step 14 Remove the releasable tie wrap that is securing the floppy drive housing to the back of the server.

Step 15 Reconnect the power cable connector with the red wire on top to the floppy disk drive. This connector is keyed and can only be inserted one way.

Step 16 Slide the floppy drive housing back into the server and fasten the four screws. Take care not to pinch any cables.

Cisco MeetingPlace Audio Server Release 5.2 DVD-ROM Upgrade Procedure

8

78-16489-01

 

 

Image 8
Contents Contents AudienceScope Required Hardware and SoftwareRequired Hardware and Software Recommended HardwareRequired Tools and Equipment Saving the License KeysPowering Down the Cisco MeetingPlace Removing the Tape Drive from the Cisco MeetingPlacePower Cable Scsi Cable Disconnect the connector at PWR1Power Cable Connector Power Cable Connector on Top Disk DriveInstalling the DVD-ROM Drive into the Cisco MeetingPlace Captive Screws on the Drive BayPidea Receptacle Pidea ReceptacleUpgrading the Cisco MeetingPlace 8112 Bios Bios Setup Utility Main ScreenKey combination to choose Diskette Drive Troubleshooting Bios Upgrade Failure Verifying the Bios UpgradeBios Revision What to Do NextReplacing the CPU and Updating the License Keys Verify that there is a modem line connected to the serverInstalling the DVD-ROM Drive Software Installing the DVD-ROM Software ExamplePassed Verifying Cisco MeetingPlace Gateway Functionality Additional ReferencesRecording Conferences with a Cisco MeetingPlace System Obtaining Documentation Cisco.comDocumentation DVD Ordering DocumentationCisco Product Security Overview Reporting Security Problems in Cisco ProductsDocumentation Feedback Cisco Technical Support Website Submitting a Service RequestObtaining Technical Assistance Definitions of Service Request Severity Obtaining Additional Publications and InformationObtaining Additional Publications and Information

DVD-ROM specifications

Cisco Systems has long been a leader in networking and telecommunications technology, providing a wide array of products and services designed to enhance connectivity and optimize network performance. Among its diverse offerings, the Cisco Systems DVD-ROM stands out as a unique tool that provides users with comprehensive resources, technical documentation, and applications for Cisco's suite of networking solutions.

The Cisco Systems DVD-ROM is designed as a complete multimedia resource, primarily aimed at IT professionals, network administrators, and technical support personnel. One of its main features is the extensive collection of technical manuals and documentation, which covers everything from installation guides to configuration best practices. This wealth of information enables users to gain a deeper understanding of Cisco products and effectively address common networking challenges.

Another notable characteristic of the Cisco Systems DVD-ROM is its compatibility with various operating systems and devices. This ensures that users can seamlessly access content, whether they are using a desktop, laptop, or even certain mobile devices. The DVD-ROM is structured to accommodate a user-friendly interface, which allows for easy navigation through the extensive library of documents and applications. Users can quickly locate the information they need, making troubleshooting and learning more efficient.

In addition to documentation, the DVD-ROM often includes software tools and utilities designed to enhance network management and performance. These tools may feature diagnostic utilities, configuration applications, and system emulators, giving users the ability to experiment with different configurations without impacting live environments. This hands-on approach to learning can be particularly beneficial for individuals preparing for Cisco Certification exams or seeking to expand their technical skill set.

The DVD-ROM is also periodically updated, ensuring that users have access to the latest features, security protocols, and best practices. By providing timely updates, Cisco ensures that professionals stay informed about advancements in networking technologies and can implement the most current solutions within their organizations.

Moreover, the inclusion of multimedia content such as video tutorials and interactive training modules further enhances the learning experience. These resources cater to various learning styles, making complex topics more accessible and engaging.

In summary, the Cisco Systems DVD-ROM serves as an invaluable asset for network professionals. Its combination of comprehensive documentation, software tools, and multimedia resources empowers users to effectively leverage Cisco’s extensive technology portfolio, fostering greater efficiency and proficiency in networking operations. With ongoing updates and a user-friendly interface, the DVD-ROM not only facilitates immediate problem-solving but also supports long-term professional development in the ever-evolving field of networking.