Cisco Systems H.323/SIP manual Assigning the Primary IP Address, Field Task

Page 33

Chapter 3 Configuring Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1

Information About Configuring Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1 for Use With

Information About Configuring Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1 for Use With Cisco Unified MeetingPlace Web Conferencing

You can install Release 5.2.1 on either the same or separate server as Cisco Unified MeetingPlace Web Conferencing. If you install Release 5.2.1and Cisco Unified MeetingPlace Web Conferencing on the same server, you must configure the server to include a primary and secondary IP address. Release

5.2.1uses the primary address, and you must configure Cisco Unified MeetingPlace Web Conferencing to use the secondary address. If Release 5.2.1 is installed on a server with more than one IP address, you must define a gateway for each IP address either in Cisco Unified CallManager, Cisco SIP Proxy server, or H.323 Gatekeeper for outdials to work.

Note Before you install multiple Cisco Unified MeetingPlace system integration applications on the same server, ensure that your system meets the requirements for integration. For additional information, see Important Information About Cisco Unified MeetingPlace Products and Cisco Media Convergence Servers at the following URL: http://www.cisco.com/univercd/cc/td/doc/product/conf/mtgplace/mpmcs.htm

How to Configure Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1 for Use With Cisco Unified MeetingPlace Web Conferencing

To configure Release 5.2.1 for use with Cisco Unified MeetingPlace Web Conferencing, perform the following procedure:

Assigning the Primary IP Address

Step 1 From the IP-gateway server desktop, right-click Network Neighborhood and choose Properties. Step 2 In the Protocols tab, click TCP/IP Protocol and click Properties.

Step 3 In the TCP/IP Properties window, select the IP Address tab.

Step 4 Enter your system information into the corresponding fields shown in Table 3-5.

Table 3-5 IP Address Tab Fields

 

 

Field

Task

 

 

 

 

 

 

Adapter

Choose the adapter that allows MeetingPlace IP Gateway to

 

 

 

communicate with the network.

 

 

 

 

 

 

Radio buttons

Choose Specify an IP address.

 

 

 

 

 

 

IP Address

Enter the primary address for the IP-gateway server

 

 

 

 

 

 

Subnet Mask

Enter the subnet mask for the IP-gateway server.

 

 

 

 

 

 

Default Gateway

Enter the default gateway for the IP-gateway server.

 

 

 

 

 

 

 

 

Administrator Guide for Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1

 

 

 

 

 

 

 

 

 

 

 

OL-6571-02

 

 

3-7

 

 

 

 

 

Image 33
Contents Text Part Number OL-6571-02 Corporate HeadquartersCopyright 2005-2006 Cisco Systems, Inc. All rights reserved N T E N T S Fast Busy Signal Heard When Using a Cisco IP Phone Worksheets OL-6571-02 Scope AudienceFeature Description New Features in This ReleaseNaming Conventions Used in This Guide Product Naming ConventionCisco Unified MeetingPlace System SIP RTP SIP Protocol DescriptionAudio Quality During a Cisco Unified MeetingPlace Meeting Step Cisco IP Phone Description Pstn Phone Description Step Cisco IP Phone Description Pstn Phone Description Step Device Description Cisco SIP IP Phone Description Step H.323 Device Description Cisco SIP IP Phone Description Additional ReferencesA P T E R CallManager Administration Click the Add a New Gateway link Field DescriptionChoose Originator Field Description Task Tone box Server to the Cisco Unified CallManager ConfigurationChoose Start Run Select MeetingPlace IP Gateway and click Remove Configuring Cisco Unified MeetingPlace Gateway SIMChanging Cisco Unified MeetingPlace Gateway SIM Settings To apply the configuration settings, click OK again OL-6571-02 A P T E R Setting Description Default General SettingsSettings SIP Settings Field Name Setting SIP Field Name Setting Assigning the Primary IP Address Field TaskChoose Specify an IP address How to Configure a Dialing Group Information About Configuring a Dialing GroupConfiguring a Dialing Group Example OL-6571-02 Troubleshooting Network Connectivity Unable to Make Calls From a Cisco IP Phone Troubleshooting Caller ConnectivityDead Air Heard When Using an H.323 Device Dead Air Heard When Using a Cisco IP PhoneFast Busy Signal Heard When Using a Cisco IP Phone MP Resp. Msg=3 CPerr=0 SeqNum=0x16 Page Unable to Dial Out on IP Ports MeetingPlace IP outdial. Phone=651515 IRC=0 PSTN=46 Unit=0 Poor or Low-Audio Quality Troubleshooting Audio ProblemsEcho OL-6571-02 Description Value WorksheetsDescription Value MeetingPlace IP call flow Value OL-6571-02 D E IN-2 IN-3 IN-4

H.323/SIP specifications

Cisco Systems has been a leading force in the development and implementation of voice and video communication technologies, prominently featuring H.323 and SIP (Session Initiation Protocol). These protocols have become cornerstones in the realm of IP-based communication, facilitating seamless interaction across disparate devices and networks.

H.323 is a set of protocols that provides multimedia communication over packet-switched networks, such as the Internet. It supports audio, video, and data communications across IP networks, utilizing a variety of components including terminals, gateways, and multipoint control units (MCUs). One key feature of H.323 is its ability to handle both point-to-point and multipoint video conferencing. This makes it particularly suitable for enterprise applications where group communication is essential.

On the other hand, SIP is a more recent and flexible signaling protocol used for initiating, maintaining, and terminating real-time sessions that include voice, video, and messaging applications. Renowned for its simplicity and interoperability, SIP can work with various communication mediums and provides extensive capabilities for managing multimedia sessions. One of the primary advantages of SIP is its scalability, allowing it to accommodate everything from small-scale personal communications to vast corporate systems.

Both H.323 and SIP support features such as call transfer, call hold, and caller ID. H.323, however, can be more complex due to its broader array of standards and components, which might require substantial configuration. SIP, conversely, is designed to be lightweight, easily integrated with existing systems and applications, making it more user-friendly for developers.

Cisco Systems enhances these protocols through their robust telecommunication infrastructure that facilitates performance optimization, security, and unparalleled user experience. With advanced technologies like Cisco Unified Communications Manager and Cisco Webex, organizations can leverage H.323 and SIP to create cohesive communication environments. Security features such as encryption and authentication ensure that sensitive conversations remain private and secure, while Quality of Service (QoS) protocols manage bandwidth effectively to maintain consistent call quality.

Ultimately, the combination of H.323's established framework and SIP's flexibility ensures that organizations using Cisco Systems can effectively manage their communication needs, fostering collaboration and connectivity in today's fast-paced digital landscape. These protocols continue to evolve, adapting to the ever-increasing demands placed on modern communication systems.