Cisco Systems H.323/SIP manual Configuring Cisco Unified MeetingPlace Gateway SIM

Page 23

Chapter 2 Installing Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1

How to Install or Upgrade to Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1

Step 2 Install Release 5.2.1by using the procedures in the“How to Install or Upgrade to Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1” section on page 2-5.

The configuration settings are imported during installation.

Upgrading to Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1 From Cisco Unified MeetingPlace IP Gateway Release 4.x

Step 1 Ensure that the tasks in “How to Complete Prerequisites for Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1 Installation or Upgrade” section on page 2-1have been completed and that you have collected the configuration information for the currently installed Cisco Unified MeetingPlace IP Gateway release.

Step 2 To uninstall Cisco Unified MeetingPlace IP Gateway 4.x, choose Start > Settings > Control Panel > Add/Remove Programs.

Step 3 Select MeetingPlace IP Gateway and click Remove.

Note Uninstalling Cisco Unified MeetingPlace IP Gateway 4.x may also uninstall any previous Cisco Unified MeetingPlace GWSIM release.

Step 4 Install Release 5.2.1 by using the procedures in “How to Install or Upgrade to Cisco Unified

MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1” section on page 2-5.

Configuring Cisco Unified MeetingPlace Gateway SIM

Gateway SIM enables Release 5.2.1 and other Cisco Unified MeetingPlace integration applications to communicate with the Cisco Unified MeetingPlace Audio Server system. With Release 5.2.1, Gateway SIM installs or upgrades automatically; perform the following steps to configure the settings:

Step 1 After the Welcome window appears, click Next.

Step 2 In the Choose Destination Location dialog box, click Next to begin installation.

Step 3 To complete installation, click Finish.

The Cisco Unified MeetingPlace Server Entry dialog box appears.

Step 4 Enter the name of the Cisco Unified MeetingPlace Audio Server system and click Next.

The Installation Key Entry dialog box appears.

Step 5 If the Gateway SIM for this gateway has been previously configured in the Cisco Unified MeetingPlace Audio Server system, enter the configured Ethernet address.

or

If the Gateway SIM for this gateway has not been previously configured, leave this field empty.

Step 6 Click Next.

Administrator Guide for Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1

 

OL-6571-02

2-7

 

 

 

Image 23
Contents Text Part Number OL-6571-02 Corporate HeadquartersCopyright 2005-2006 Cisco Systems, Inc. All rights reserved N T E N T S Fast Busy Signal Heard When Using a Cisco IP Phone Worksheets OL-6571-02 Scope AudienceProduct Naming Convention New Features in This ReleaseFeature Description Naming Conventions Used in This GuideCisco Unified MeetingPlace System SIP RTP SIP Protocol DescriptionAudio Quality During a Cisco Unified MeetingPlace Meeting Step Cisco IP Phone Description Pstn Phone Description Step Cisco IP Phone Description Pstn Phone Description Step Device Description Cisco SIP IP Phone Description Step H.323 Device Description Cisco SIP IP Phone Description Additional ReferencesA P T E R CallManager Administration Choose Originator Click the Add a New Gateway linkField Description Field Description Task Tone box Server to the Cisco Unified CallManager ConfigurationChoose Start Run Select MeetingPlace IP Gateway and click Remove Configuring Cisco Unified MeetingPlace Gateway SIMChanging Cisco Unified MeetingPlace Gateway SIM Settings To apply the configuration settings, click OK again OL-6571-02 A P T E R Settings Setting Description DefaultGeneral Settings SIP Settings Field Name Setting SIP Field Name Setting Choose Specify an IP address Assigning the Primary IP AddressField Task How to Configure a Dialing Group Information About Configuring a Dialing GroupConfiguring a Dialing Group Example OL-6571-02 Troubleshooting Network Connectivity Unable to Make Calls From a Cisco IP Phone Troubleshooting Caller ConnectivityFast Busy Signal Heard When Using a Cisco IP Phone Dead Air Heard When Using an H.323 DeviceDead Air Heard When Using a Cisco IP Phone MP Resp. Msg=3 CPerr=0 SeqNum=0x16 Page Unable to Dial Out on IP Ports MeetingPlace IP outdial. Phone=651515 IRC=0 PSTN=46 Unit=0 Poor or Low-Audio Quality Troubleshooting Audio ProblemsEcho OL-6571-02 Description Value WorksheetsDescription Value MeetingPlace IP call flow Value OL-6571-02 D E IN-2 IN-3 IN-4

H.323/SIP specifications

Cisco Systems has been a leading force in the development and implementation of voice and video communication technologies, prominently featuring H.323 and SIP (Session Initiation Protocol). These protocols have become cornerstones in the realm of IP-based communication, facilitating seamless interaction across disparate devices and networks.

H.323 is a set of protocols that provides multimedia communication over packet-switched networks, such as the Internet. It supports audio, video, and data communications across IP networks, utilizing a variety of components including terminals, gateways, and multipoint control units (MCUs). One key feature of H.323 is its ability to handle both point-to-point and multipoint video conferencing. This makes it particularly suitable for enterprise applications where group communication is essential.

On the other hand, SIP is a more recent and flexible signaling protocol used for initiating, maintaining, and terminating real-time sessions that include voice, video, and messaging applications. Renowned for its simplicity and interoperability, SIP can work with various communication mediums and provides extensive capabilities for managing multimedia sessions. One of the primary advantages of SIP is its scalability, allowing it to accommodate everything from small-scale personal communications to vast corporate systems.

Both H.323 and SIP support features such as call transfer, call hold, and caller ID. H.323, however, can be more complex due to its broader array of standards and components, which might require substantial configuration. SIP, conversely, is designed to be lightweight, easily integrated with existing systems and applications, making it more user-friendly for developers.

Cisco Systems enhances these protocols through their robust telecommunication infrastructure that facilitates performance optimization, security, and unparalleled user experience. With advanced technologies like Cisco Unified Communications Manager and Cisco Webex, organizations can leverage H.323 and SIP to create cohesive communication environments. Security features such as encryption and authentication ensure that sensitive conversations remain private and secure, while Quality of Service (QoS) protocols manage bandwidth effectively to maintain consistent call quality.

Ultimately, the combination of H.323's established framework and SIP's flexibility ensures that organizations using Cisco Systems can effectively manage their communication needs, fostering collaboration and connectivity in today's fast-paced digital landscape. These protocols continue to evolve, adapting to the ever-increasing demands placed on modern communication systems.