2400
4800
9600
200
100
50
60
30
15
19200
38400
57600
50
50
25
15
15
7.6
115200
12
3.7
Serial Cable CAB−232MT
This section presents the cable assembly and pinouts for the CAB−232MT serial cable.
Note: The cable itself identifies the Cisco router as a data terminal equipment (DTE) or data communications equipment (DCE) device to other devices in the network; for this reason, it is important to select the correct product number from the table below.
The cable gender for this product (part number 72−0793−01) is Male − Male, mode − DTE.
The CAB−232MT cable is used in the Cisco 7000 family, Cisco 4000 series, Cisco 3600 series, Cisco 2500 series, Cisco 1600 series, Cisco access servers, and AccessPro PC cards. This cable has a male DB−60 connector on the Cisco end and a male DB−25 connector on the network end.
EIA/TIA−232 Serial Cable Assembly
EIA/TIA−232 DTE Cable Pinouts
The table below shows the EIA/TIA−232 DTE cable pinouts (DB−60 to DB−25).
Note: The arrows indicate signal direction:
∙−−−> indicates DTE to DCE
∙<−−− indicates DCE to DTE
60 |
|
|
|
|
|
Pin1 | Signal | Description | Direction | 25 Pin | Signal |
J1−50 | MODE_0 | Shorting | − | − | − |
|
| group |
|
|
|
|
|
|
|
|
|