Fujitsu Siemens Computers S7211, S7210 manual F o M e n u

Page 3

I n f o M e n u

severe, it will give you an opportunity to modify the setup utility settings, as described in the following steps:

1.When you turn on or restart the computer there is a beep and/or the following message appears on the screen:

Error message - please run SETUP program Press <F1> key to continue, <F2> to run SETUP

2.If an error message is displayed on the screen, and you want to continue with the boot process and start the operating system anyway, press the [F1] key.

If your notebook emits a series of beeps that sounds like a code and the display is blank, please refer to the Troubleshoot- ing Section in the system User’s Guide. The Troubleshooting Section includes a list of error messages and their meanings.

If your data security settings require it, you may be asked for a password before the operating system will be opened.

3.If an error message is displayed on the screen, and you want to enter the setup utility, press the [F2] key.

4.When the setup utility starts with a fault present, the system displays the following message:

Warning! Error message [Continue]

5.Press any key to enter the setup utility. The system will then display the Info Menu with current param- eters values.

3

Image 3
Contents Fujitsu LifeBook Series Navigating through the Setup Utility Bios Setup UtilityEntering the Bios Setup Utility Using the TrustedCore MenuF o M e n u Processor Type IntelR CoreTM2 Duo CPU Onboard MAC Address Fields, Options and Defaults for the Info MenuBios Version XX XX/XX/2007 Memory Slot 1024 Info Menu Displays Basic System InformationChange each segment of the date separately. Move between System Menu Setting Standard System ParametersFields, Options and Defaults for the System Menu Year. MM/DD/YYYY for example 03/20/2007. You mayDrive0 Selects the Drive0 Product Serial ATA drive Number of the hardSerial ATA drive Number None Setup items do not appearDrive0 Submenu of the System Menu Type AutoDrive1 Submenu of the System Menu Following setup items do not appearSet to mode 2 for Fast PIO 4 / DMA Mode Drive to select the optimum transfer modeExiting from System Menu Advanced Menu Setting Device Feature Controls Fields, Options and Defaults for the Advanced MenuIncluding routing of video signals to different displays CPU Features Power button, Wake Up On LAN, and control volume settingsLife optimization Info System Is Enabled Serial Port Disabled EnabledPrinter or similar device. ECP Mode allows communication 278 Allel port is EnabledKeyboard/Mouse Features Submenu of the Advanced Menu Display Internal Flat Panel Auto Video Features Submenu of the Advanced MenuInternal Device Configuration Submenu Internal Device Configurations Submenu of the Advanced MenuCPU Features Submenu CPU Features Submenu of the Advanced MenuUSB devices are available without a USB-aware OS USB Features Submenu of the Advanced MenuWhen Enabled is selected, Legacy USB Emulation is enabled Key are enabled. Note that enabling this feature may causeDisabled Miscellaneous Configurations Submenu of the Advanced MenuMenu Field Options Default Description Event Logging Submenu Event Logging Submenu of the Advanced MenuBoot Exit Security Menu Setting the Security FeaturesExiting from the Security Menu Fields, Options and Defaults for the Security MenuHard Disk Security Submenu of the Security Menu Password Entry on Disabled Enabled Owner Information Submenu Owner Information Submenu of the Security MenuTPM Security Chip Setting Submenu of the Security Menu Becomes selectable after rebootAllow you to access already-encrypted data Boot Menu Selecting the Operating System Source Fields, Options and Defaults for the Boot MenuBoot-time Disabled Drive0 Boot Device Priority Submenu of the Boot MenuExiting from Boot Menu Excluded from boot orderExit Saving Exit Menu Leaving the Setup UtilityFields, Options and Defaults for the Exit Menu Power Off