Fujitsu Siemens Computers S7210, S7211 Drive0 Selects the Drive0 Product, Serial ATA drive Number

Page 6

L i f e B o o k S S e r i e s B I O S

Table 2: Fields, Options and Defaults for the System Menu

Note that the parameters listed in the following table may vary depending upon your system’s configuration.

Menu Field	Options		Default	Description


Drive0	Selects the Drive0		The product	Display the type of device on this ATA/IDE interface. Pressing the
	Serial ATA drive		number of the hard	Enter key selects the Serial ATA Drive0 submenu allowing additional
	submenu		drive.	device configuration options for this interface.

Drive1:	Selects the Drive1		The product	Display the type of device on this ATA/IDE interface, if there is one.
	Serial ATA drive		number of the	Pressing the Enter key selects the Serial ATA Drive1 submenu allow-
	submenu		optical drive.	ing additional device configuration options for this interface.

Language:	■	English (US)	[English (US)]	The default setting differs between the US/European and the
	■	Japanese (JP)		Japanese model. Selects the display language for the BIOS.

6

Image 6

Contents Fujitsu LifeBook Series Using the TrustedCore Menu Bios Setup UtilityEntering the Bios Setup Utility Navigating through the Setup UtilityF o M e n u Info Menu Displays Basic System Information Fields, Options and Defaults for the Info MenuBios Version XX XX/XX/2007 Memory Slot 1024 Processor Type IntelR CoreTM2 Duo CPU Onboard MAC AddressYear. MM/DD/YYYY for example 03/20/2007. You may System Menu Setting Standard System ParametersFields, Options and Defaults for the System Menu Change each segment of the date separately. Move betweenDrive0 Selects the Drive0 Product Serial ATA drive Number of the hardSerial ATA drive Number Type Auto Setup items do not appearDrive0 Submenu of the System Menu NoneMode Drive to select the optimum transfer mode Following setup items do not appearSet to mode 2 for Fast PIO 4 / DMA Drive1 Submenu of the System MenuExiting from System Menu Advanced Menu Setting Device Feature Controls Fields, Options and Defaults for the Advanced MenuIncluding routing of video signals to different displays CPU Features Power button, Wake Up On LAN, and control volume settingsLife optimization Info System 278 Allel port is Enabled Serial Port Disabled EnabledPrinter or similar device. ECP Mode allows communication Is EnabledKeyboard/Mouse Features Submenu of the Advanced Menu Video Features Submenu of the Advanced Menu Display Internal Flat Panel AutoInternal Device Configurations Submenu of the Advanced Menu Internal Device Configuration SubmenuCPU Features Submenu of the Advanced Menu CPU Features SubmenuKey are enabled. Note that enabling this feature may cause USB Features Submenu of the Advanced MenuWhen Enabled is selected, Legacy USB Emulation is enabled USB devices are available without a USB-aware OSMiscellaneous Configurations Submenu of the Advanced Menu DisabledMenu Field Options Default Description Event Logging Submenu of the Advanced Menu Event Logging SubmenuSecurity Menu Setting the Security Features Boot ExitFields, Options and Defaults for the Security Menu Exiting from the Security MenuHard Disk Security Submenu of the Security Menu Password Entry on Disabled Enabled Owner Information Submenu of the Security Menu Owner Information SubmenuTPM Security Chip Setting Submenu of the Security Menu Becomes selectable after rebootAllow you to access already-encrypted data Boot Menu Selecting the Operating System Source Fields, Options and Defaults for the Boot MenuBoot-time Disabled Excluded from boot order Boot Device Priority Submenu of the Boot MenuExiting from Boot Menu Drive0Power Off Exit Menu Leaving the Setup UtilityFields, Options and Defaults for the Exit Menu Exit Saving