Fujitsu Siemens Computers S7211, S7210 manual Drive0 Submenu of the System Menu, Type Auto, None

Page 7

S y s t e m M e n u

Drive0 Submenu of the System Menu

The Drive0 submenu identifies what ATA devices are installed.

			Phoenix TrustedCore(tm) Setup Utility
	Info	System	Advanced	Security	Boot	Exit

		Drive0 [FUJITSU MHW2120BH]				Item Specific Help

	Type:		[Auto]]			Select Serial ATA/IDE
				LBA Format		drive installed here.
	Total Sectors:		234441648
	Maximum Capacity:		120GB SATA1			[Auto]
						The BIOS auto-types the
						drive on boot time.
						[None]
						The drive is disabled.

F1	Help	Select	Item	-/Space	Change	Values
ESC	Exit	Select	Menu	Enter	Select	▲ Sub-Menu

Figure 3. Drive0 Master Submenu

F9 Setup Defaults

F10 Save and Exit

Table 3: Fields, Options and Defaults for the Drive0 Submenu of the System Menu

Menu Field	Options		Default	Description


Type:	■	Auto	[Auto]	Selects the hard drive device type. Select Auto to have the type automati-
	■	None		cally identified by the BIOS at POST. If None is selected, all of the following
				Setup items do not appear.

LBA Format				Logical Block Addressing (LBA)

Total Sectors:	---		---	The total number of sectors on your hard disk

Maximum Capacity:	---		---	The maximum capacity of your hard disk

7

Image 7

Contents Fujitsu LifeBook Series Navigating through the Setup Utility Bios Setup UtilityEntering the Bios Setup Utility Using the TrustedCore MenuF o M e n u Processor Type IntelR CoreTM2 Duo CPU Onboard MAC Address Fields, Options and Defaults for the Info MenuBios Version XX XX/XX/2007 Memory Slot 1024 Info Menu Displays Basic System InformationChange each segment of the date separately. Move between System Menu Setting Standard System ParametersFields, Options and Defaults for the System Menu Year. MM/DD/YYYY for example 03/20/2007. You maySerial ATA drive Number of the hard Drive0 Selects the Drive0 ProductSerial ATA drive Number None Setup items do not appearDrive0 Submenu of the System Menu Type AutoDrive1 Submenu of the System Menu Following setup items do not appearSet to mode 2 for Fast PIO 4 / DMA Mode Drive to select the optimum transfer modeExiting from System Menu Fields, Options and Defaults for the Advanced Menu Advanced Menu Setting Device Feature ControlsIncluding routing of video signals to different displays Power button, Wake Up On LAN, and control volume settings CPU FeaturesLife optimization Info System Is Enabled Serial Port Disabled EnabledPrinter or similar device. ECP Mode allows communication 278 Allel port is EnabledKeyboard/Mouse Features Submenu of the Advanced Menu Display Internal Flat Panel Auto Video Features Submenu of the Advanced MenuInternal Device Configuration Submenu Internal Device Configurations Submenu of the Advanced MenuCPU Features Submenu CPU Features Submenu of the Advanced MenuUSB devices are available without a USB-aware OS USB Features Submenu of the Advanced MenuWhen Enabled is selected, Legacy USB Emulation is enabled Key are enabled. Note that enabling this feature may causeDisabled Miscellaneous Configurations Submenu of the Advanced MenuMenu Field Options Default Description Event Logging Submenu Event Logging Submenu of the Advanced MenuBoot Exit Security Menu Setting the Security FeaturesExiting from the Security Menu Fields, Options and Defaults for the Security MenuHard Disk Security Submenu of the Security Menu Password Entry on Disabled Enabled Owner Information Submenu Owner Information Submenu of the Security MenuBecomes selectable after reboot TPM Security Chip Setting Submenu of the Security MenuAllow you to access already-encrypted data Fields, Options and Defaults for the Boot Menu Boot Menu Selecting the Operating System SourceBoot-time Disabled Drive0 Boot Device Priority Submenu of the Boot MenuExiting from Boot Menu Excluded from boot orderExit Saving Exit Menu Leaving the Setup UtilityFields, Options and Defaults for the Exit Menu Power Off