Cisco Systems 15454-ML-4FC= technical specifications 1shows the FCMR-4 faceplate and block diagram

FC_MR-4 Card Description

example, eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye hazard. Use of controls or adjustments, or performance of procedures other than those specified may result in hazardous radiation exposure.

The FC_MR-4 (Fibre Channel 4-port) card uses pluggable Gigabit Interface Converters (GBICs) to transport non-SONET/SDH-framed, block-coded protocols over SONET/SDH in virtually concatenated or contiguously concatenated payloads. The FC_MR-4 can transport Fibre Channel over SONET/SDH using Fibre-Channel client interfaces and allows transport of one of the following at a time:

•Two contiguously concatenated (CCAT) STS-24c/VC4-8c circuits

•One STS-48c/VC4-16c CCAT

•Two virtually concatenated (VCAT) circuits (STC3c-8V/VC4-8v) compliant with ITU-T G.7041 GFP-T and Telcordia GR-253-CORE

•One STS-24c/VC4-8c CCAT and one STS-24c/VC4-8c VCAT

In Software Release 4.6, only two of the four ports can be active at one time.

Figure 0-1shows the FC_MR-4 faceplate and block diagram.

Figure 0-1 FC_MR-4 Faceplate and Block Diagram

FC3_MR-4

FAIL

ACT

Rx

1

Tx

ACT/LNK

Rx

2

Tx

ACT/LNK

Rx

3

Tx

ACT/LNK

Rx

4

Tx

ACT/LNK

			Decode and
FLASH	SDRAM	MPC8250	Control
			PLD
GBIC
OPTICS
GBIC			TADM	BTC	IBPIA
OPTICS		RUDRA		192
	SERDES				B
GBIC		FPGA			A
					C
OPTICS
					K
GBIC			CDR +		P
OPTICS			SONET		L
			FRAMER		A
					N
					E
			ELAN		IBPIA
			VCAT
		QDR MEMORY	PROCESSOR
			DDR
			MEMORY		110595

Installing Cisco ONS 15454 SONET/SDH FC_MR-4 Cards

2 78-16233-01