FC_MR-4 Card Description
FC_MR-4 Card-Level Indicators
Table 0-1describes the two card-level LEDs on the FC_MR-4 card.
Table 0-1 FC_MR-4 Card-Level Indicators
Card-Level Indicators | Description |
| |
Red FAIL LED | The red FAIL LED indicates that the card’s processor is not ready. Replace the |
| card if the red FAIL LED persists. |
| |
Green ACT LED | If the ACTV/STBY LED is green, the card is operational and ready to carry |
| traffic. |
| |
FC_MR-4 Port-Level Indicators
Each FC_MR-4 port has a corresponding ACT/LNK LED. The ACT/LNK LED is solid green if the port is available to carry traffic, is provisioned as in-service, and in the active mode. The ACT/LNK LED is flashing green if the port is carrying traffic. The ACT/LNK LED is steady amber if the port is not enabled and the link is connected, or if the port is enabled and the link is connected but there is a SONET transport error. The ACT/LNK LED is unlit if there is no link.
You can find the status of the card ports using the LCD screen on the ONS 15454 fan-tray assembly. Use the LCD to view the status of any port or card slot; the screen displays the number and severity of alarms for a given port or slot. Refer to the Cisco ONS 15454 Troubleshooting Guide for a complete description of the alarm messages.
FC_MR-4 Card Specifications
The FC_MR-4 card has the following specifications:
•Environmental
–Operating temperature
C-Temp (15454-E100T): –5 to +55 degrees Celsius (23 to 131 degrees Fahrenheit)
–Operating humidity: 5 to 95%, noncondensing
–Power consumption: 60 W, 1.35 A, 221.93 BTU/hr
•Dimensions
–Height: 321.3 mm (12.650 in.)
–Width: 18.2 mm (0.716 in.)
–Depth: 228.6 mm (9.000 in.)
–Card weight: 1.17 kg (2.59 lb)
•Compliance
–For compliance information, refer to the Cisco Optical Transport Products Safety and Compliance Information.
Installing Cisco ONS 15454 SONET/SDH FC_MR-4 Cards
