Cisco Systems 4033836 Section Field Description Basic Settings, WPS Push Button Setup Option

Configure Wireless Settings

Wireless Configuration Wi-Fi Protected Setup Example

Wireless Configuration Wi-Fi Protected Setup Page Description

Use the descriptions and instructions in the following table to configure the basic settings for Wi-Fi Protected Setup for the residential gateway. After you make your selections, click Save Settings to apply your changes or Cancel Changes to cancel.

Section	Field Description
Basic Settings	Enable or Disable the wireless network
	Wi-Fi Protected Setup Configuration
	The Wi-Fi Protected Setup feature automatically configures an
	encryption-secured, wireless network. To use Wi-Fi Protected Setup, you
	must have at least one other device that supports Wi-Fi Protected Setup
	in your network. After you have configured your Wi-Fi Protected Setup
	devices, you can manually configure other devices.
	WPS Push Button Setup (Option 1)
	Press the Wi-Fi Protected Setup button on the Basic Wireless Settings
	page or the button on the back panel of the gateway to register a wireless
	client with the gateway. Press the Wi-Fi Protected Setup software button
	on the client side at the same time as the Wi-Fi Protected Setup button is
	pushed on the gateway. The connection will be automatically set up.

4021192 Rev B 39