Configure Wireless Settings
Section | Field Description |
| DTIM Interval |
| The Delivery Traffic Indication Message (DTIM) indicates the interval between |
| Broadcasts/Multicast transmissions. DTIM field is a countdown field informing |
| clients of the next window for listening to broadcast and multicast messages. When |
| the device has buffered broadcast or multicast messages for associated clients, it |
| sends the next DTIM with a DTIM Interval value. Its clients hear the beacons and |
| awaken to receive the broadcast and multicast messages. |
| (Default: 1, Range: |
Fragmentation Threshold
The fragmentation threshold value specifies the maximum size for a packet before data is fragmented into multiple packets. If you experience a high packet error rate, you may slightly increase the Fragmentation Threshold. Setting the Fragmentation Threshold too low may result in poor network performance. Only minor reduction of the default value is recommended. In most cases, it should remain at its default value of 2346.
RTS Threshold
The RTS Threshold determines at what packet size beyond which the ready to send/clear to send (RTS/CTS) mechanism is invoked. Should you encounter inconsistent data flow, only minor reduction of the default value, 2346, is recommended. If a network packet is smaller than the preset RTS Threshold size, the RTS/CTS mechanism will not be enabled. The device sends Request to Send (RTS) frames to a particular receiving station and negotiates the sending of a data frame. After receiving an RTS, the wireless station responds with a Clear to Send (CTS) frame to acknowledge the right to begin transmission. The RTS Threshold value should remain at its default value of 2347.
50 | 4021192 Rev B |