Fujitsu Siemens Computers B15-1 manual Operation of the monitor, Connecting cables to the computer

Colour monitor B15-1

Connecting cables to the computer

Information on the computer connections and interfaces is contained in the operating manual for your computer.

i	If your computer has two monitor ports ("onboard" screen controller and separate
	graphics card), the monitor port for the separate graphics card is usually active.

ÊConnect the data cable to the (active) monitor port on the computer and secure the plug-in connection by tightening the safety screws.

ÊInsert the other plug of the audio line in the audio input of the computer.

ÊConnect the connector of the power cable supplied into a properly grounded mains outlet and ensure a secure connection.

ÊPlug the power connector of the computer into a properly grounded mains outlet.

When you start working with your monitor for the first time you should install the

i appropriate graphics drivers for your application software. Details of how to do this are provided in the documentation on your screen controller/the associated driver software.

Operation of the monitor

The monitor offers the following possibilities that enable it to be optimally adjusted for the respective user and the respective situation.

Adjusting rake and rotation

The rake of the monitor can be adjusted by -5° (forward) and +15° (back) from its vertical position.

ÊGrasp the monitor with both hands on the right and left edge of the casing and adjust it to the desired rake.

A26361-K905-Z100-2-5E19 English - 9