Colour monitor
All changes are stored automatically.
The first function
ÊIf necessary, press the 6 or 5 button to mark the desired icon.
ÊPress the SELECT/MENU button to select the highlighted function.
ÊPress the 6 or 5 button to adjust the value for the selected function.
ÊPress the EXIT/AUTO button to exit the function.
ÊIf necessary, press the button 6 or 5 to mark another function or press the EXIT/AUTO button to return to the main menu.
If you want to change other settings, select the corresponding function from the OSD main menu. All possible adjustments of the main menu are described in the following.
Adjusting the brightness and contrast
Calling the Brightness / Contrast setting window.
Brightness
Contrast
Auto Level
Setting the brightness of the display
With this function you change the brightness of the background lighting.
Setting the contrast of the display
With this function you modify the contrast of bright colour tones.
Setting the brightness of the display
With this function you can automatically set the contrast. Press the SELECT/MENU button to activate the function.
If the contrast is set too high, bright surfaces can no longer be distinguished from very i bright surfaces. If the contrast is set too low, the maximum brightness will not be
achieved.
Adjusting size and position
Calling the Image adjust setting window
Adjusting the horizontal position
With this function you move the picture to the left or to the right.
English - 13 |