Fujitsu Siemens Computers manual Cleaning, Transport, Colour monitor B15-1

Page 5
Cleaning

Colour monitor B15-1

If you use a different data cable from the one supplied, ensure that it is adequately shielded. CE conformance and optimum picture quality are guaranteed only if you use the data cable supplied.

No data transfer cables should be connected or disconnected during a thunderstorm.

Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get inside the device (danger of electric shock, short circuit).

In emergencies (e.g. damaged casing, elements or cables, penetration of liquids or foreign matter), switch off the unit, disconnect the power plug and contact your sales outlet or our help desk.

The screen background lighting contains mercury. You must observe the applicable handling and disposal safety regulations for fluorescent tubes.

Only qualified technicians should repair the device. Unauthorised opening and incorrect repair may greatly endanger the user (electric shock, fire risk).

You may set only those resolutions and refresh rates specified in the "Technical data" chapter. Otherwise you may damage your monitor. If you are in any doubt, contact your sales outlet or our help desk.

Keep this operating manual together with your device. If you pass on the device to third parties, you should include this manual.

Cleaning

Always pull out the power plug before you clean the monitor.

Do not clean any interior parts yourself, leave this job to a service technician.

Do not use any cleaning agents that contain abrasives or may corrode plastic.

Ensure that no liquid will run into the system.

Ensure that the ventilation areas of the monitor are free.

The display surface of the LCD monitor is sensitive to pressure and scratches. Clean it only using a soft, slightly moistened cloth.

Wipe the monitor casing with a dry cloth. If the monitor is particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out.

Transport

Transport the monitor with care and only in its original packaging or another corresponding packaging fit to protect it against knocks and jolts.

Never drop the LCD monitor (danger of glass breakage).

A26361-K905-Z100-2-5E19

English - 3

Image 5
Contents Contents Page Additional information IntroductionTarget group Important notes Safety notesNotational conventions Colour monitor B15-1Transport CleaningEnergy Star Guidelines Power cableCE marking FCC Class B Compliance StatementDisposal and recycling Installing an ergonomic video workstation Checking the contents of the consignmentConnecting the monitor Connecting cables to the monitor Operation of the monitor Connecting cables to the computerAdjusting rake and rotation Notes on power management Switching the monitor on/offStage Energy-saving modeBasic monitor settings with the floppy disk supplied Changing the monitor settingsChanging the monitor settings with the buttons of the control panel Performing auto-adjustment of the monitorAdjusting background lighting Monitor settings using the OSD menuActivating/deactivating muting Locking the OSD menuAdjusting size and position Adjusting the brightness and contrastSetting colour temperature and colours Adjusting the volumeSetting display of the OSD menu NativeDisplaying information Setting functions in the Advanced menuwhite Notes on ergonomic colour adjustmentcyan greenRemoving the monitor base Dimensions and weight LCD monitor Technical dataAccessories Storable display modesVESA-DDC-compatible VGA interface Preset operating modesHaving this problem? Trouble shootingPin assignment D-SUB Meaning## kHz / ## Hz Frequency out of rangePlease change the display mode to 1024x768 with 60 HzPermanently unlit or lit pixels