Colour monitor
Once an input is made at the computer the screen contents are redrawn and full power is restored.
For detailed information on how
When the monitor is switched to the
i system a power consumption of up to 1 W is maintained to feed the circuit for redrawing the screen contents.
To completely switch off the power consumption, pull the plug of the monitor power cable out of the mains outlet.
Changing the monitor settings
When putting the monitor into operation for the first time, the screen display should be optimally adapted to the screen controller used and adjusted in accordance with your needs.
Basic monitor settings with the floppy disk supplied
If one of the operating systems Windows 95/98, Windows NT, Windows Me, Windows 2000, Windows XP or OS/2 (with Windows emulation installed) is used, the basic monitor settings can be set with the floppy disk supplied.
ÊInsert the supplied floppy disk into the floppy disk drive.
ÊOpen the Readme file on the floppy disk and follow the instructions in the file.
Your monitor should now already be properly adjusted. If none of the above operating systems is used or minor corrections are to be made to the screen display, then change the monitor settings with the OSD menu.
Changing the monitor settings with the buttons of the control panel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
| 2 | 3 | |||||
|
|
|
|
|
|
|
|
|
1 = Buttons for the OSD menu | 2 = | Power indicator |
|
| ||||
3 = | ON/OFF switch |
|
| |||||
Use the buttons of the control panel to make the following monitor settings directly while the OSD menu is switched off.
Performing auto-adjustment of the monitor
ÊPress the AUTO button for approx. 1 second while the OSD menu is switched off. The Auto Processing message is displayed.
Picture quality and position are set to optimum values for your system.
English - 11 |