Cisco Systems manual Mounting the Cisco ASR 901 Router, Rack-Mounting Configuration Guidelines

Page 32

Chapter 3 Installing the Cisco ASR 901 Mobile Wireless Router

Mounting the Cisco ASR 901 Router

Mounting the Cisco ASR 901 Router

Note The Cisco ASR 901 Router is qualified only for horizontal orientation. You should use additional safety measures for vertical orientation.

Each Cisco ASR 901 router includes rack-mounting brackets. Using the rack-mounting brackets, you can front-mount theCisco ASR 901 router in a 19-inch (48.3-cm) equipment rack that conforms to the EIA-310-D specification (the inside width of the rack should be 17.72 to 17.80 inches [45 to 45.21 cm]).

Using the two rack-mounting brackets for mounting (part number 700-33522-01), you can recess Cisco ASR 901 router in the equipment rack. This arrangement provides extra space in front of the router for the cables and allows you to close the doors of racks equipped with front-close doors.

If you need to attach or replace the rack-mounting brackets, see the “Attaching the Rack-Mounting Brackets” section on page 3-3.

The rack-mounting brackets are slotted to allow the router to be mounted in racks with EIA 1.25-inch (3.175-cm) or WECO 1.0-inch (2.54-cm) hole spacing. When installed in the rack, the Cisco ASR 901 router requires one EIA 1.75-inch (4.4-cm) vertical mounting space (or 1 rack unit [RU]) for mounting (see the “Mounting the Cisco ASR 901 Router in a Rack” section on page 3-3).

Caution Allow clearance on either side of the Cisco ASR 901 router for cooling air to be drawn in through the left side and circulated through the chassis and out the two fan exhaust ports mounted on the other side of the chassis.

Rack-Mounting Configuration Guidelines

Follow these guidelines to configure the equipment rack:

•When mounting the router to an equipment rack, ensure that the rack is bolted to the floor.

•Because you may install more than one router into the rack, ensure that the weight of all of the routers installed does not make the rack unstable.

Caution Some equipment racks are also secured to ceiling brackets, if necessary, due to the weight of the equipment in the rack. Make sure that the rack you are using to install the routers is secured to the building structure.

•As mentioned in the “Air Flow Guidelines” section on page 2-5, maintain a 6-inch (15.24-cm) clearance on each side of the router to ensure adequate air intake and exhaust.

•Avoid installing the routers in an overly congested rack. Air flowing to or from other routers in the rack might interfere with the normal flow of cooling air through the routers, increasing the potential for overtemperature conditions within the routers.

•Allow at least 19 inches (48.7 cm) of clearance at the front and rear of the rack for router maintenance.

•Follow your local practices for cable management. Ensure that cables to and from the routers do not impede access to perform equipment maintenance or upgrades.

Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide

3-2

OL-23778-01

 

 

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Cisco Systems, Inc Page Audience Enter a Directory and Determine the Current Directory Time of Day Pinouts OL-23778-01 Document Revision History Revision Date Change SummaryObjectives AudienceOrganization ConventionsSafety Warnings Related DocumentationOL-23778-01 Introduction Hardware DescriptionCisco ASR 901 Router Front View Cisco ASR 901 Router Ethernet Version Front View Cisco ASR 901 Router-Front ViewCisco ASR 901 Router Rear View Fan Grounding Point LugPower Supply Safety PrecautionsSpecification Value LEDsPin Connector a RTNEnvironmental Monitoring Temperature Sensor System SpecificationsPin Connector B Description SpecificationRouter Interface Numbering Interface Number Location LabelRegulatory Compliance OL-23778-01 Safety Guidelines Safety with EquipmentSafety with Electricity Preventing Electrostatic Discharge Damage Power Supply Considerations PrerequisitesSite Planning Site EnvironmentMethod of Procedure Air Flow GuidelinesUnpacking and Checking the Contents of your Shipment Required Tools and EquipmentInstallation Checklist Task Verified byConsole Port Considerations Creating a Site LogConsole Port Connections Task Verified by DatePreparing to Install the Router Console Port Considerations OL-23778-01 Installing the Cisco ASR 901 Mobile Wireless Router Network ModulesRack-Mounting Configuration Guidelines Mounting the Cisco ASR 901 RouterAttaching the Rack-Mounting Brackets Mounting the Cisco ASR 901 Router in a RackAttaching the Cable Guides Rack-Mounting Brackets section onConnecting the Chassis Ground and Power Grounding the Cisco ASR 901 RouterGrounding Point Power Connection Compliance Stripping a Ground WireWiring the DC-Input Power Source 6-Pin Terminal BlockInstalling and Removing SFP Modules Installing SFP ModulesInstalling an SFP Module into an SFP Module Slot Removing SFP ModulesConnecting Cables Connecting the Console PortTypes of RJ-45 Cables Console PortConnecting T1 and E1 Interface Cables Connecting the Network CablesConnecting Gigabit Ethernet Interface Cables Connecting GPS Cables Connecting SFP CablesConnecting Cables to the Bits Interface Powering On the Router Connecting to Alarm PortConnecting to the Management Ethernet Port Dressing Router CablesChecklist for Power Up Power-On ProcedureFormatting Procedures for Flash Memory Interpreting Front-Panel LEDsCopying Files File and Directory ProceduresDisplaying Contents of the Flash Memory Displaying File Content Deleting Files from the Flash MemoryWhat to Do After Installing the Hardware Enter a Directory and Determine the Current DirectoryOL-23778-01 Troubleshooting Problem SolvingSymptom Possible Cause Corrective Action Troubleshooting the Power and Cooling SystemsEnvironmental Reporting Features Troubleshooting Cables, and Connections Information Packet publicationReading the LEDs Chassis LEDsCopper GE from Quad combo PHY ports contain Two Leds each System LEDT1/E1 Interface LEDs SFP Ethernet Interface LEDsRJ-45 Ethernet Interface LEDs Color/State Description two LEDs for each T1/E1 portOL-23778-01 Cable Specifications Gigabit Ethernet Connector PinoutsT1/E1 Port Pinouts SFP Port Pinouts and Cable SpecificationsPin FE Signal GE Signal Pin Signal Name Direction Description Console Port Signals and PinoutsConsole Port Signals and Pinouts Pin Signal Name HP Pins Direction Description RJ-45-to-DB-9 Terminal Adapter ConsoleConsole RJ-45-to-DB-25 Port DTE Terminal Adapter Device Signal RJ-45 Pin DB-25 PinIdentifying a Rollover Cable GPS Port Pinouts Bits Port PinoutsTime of Day Pinouts Alarm Port Pinouts Pin Signal Name DescriptionManagement Ethernet Port Pinouts 10 MhzRxDP RxDN TxDP Not connected TxDN Site Log Date InitialsNumerics IN-2 IN-3 IN-4

ASR 901 specifications

Cisco Systems ASR 901 is an advanced aggregation services router that is designed to meet the needs of service providers and enterprise networks. It offers a versatile platform suitable for various deployment scenarios ranging from mobile backhaul and broadband aggregation to IP edge routing. The ASR 901 is known for its compact size, energy efficiency, and robust performance, making it a preferred choice for operators looking to enhance their network infrastructure.

One of the main features of the Cisco ASR 901 is its small form factor, which facilitates installation in space-constrained environments. Its design allows for easy deployment in both indoor and outdoor settings, making it ideal for applications such as cell site backhaul and remote locations. The router supports a wide range of interfaces, including Ethernet and T1/E1, providing flexibility in connecting different network types.

The ASR 901 is built on Cisco's IOS XR software, ensuring a highly reliable and secure operating environment. This software is known for its scalability and robustness, providing operators with the ability to support large numbers of subscribers and high traffic volumes. The router also supports system redundancy features, ensuring continuous service availability and minimizing downtime.

In terms of performance, the Cisco ASR 901 delivers high throughput and low latency, which are crucial for delivering quality services like voice, video, and data. With its support for advanced network technologies such as MPLS and IPv6, the ASR 901 can effectively manage complex networking requirements while accommodating future growth.

Security is also a key consideration with the ASR 901. It includes features such as advanced encryption, access control lists, and intrusion prevention systems, aimed at protecting the integrity of network communications. Moreover, its support for Virtual LAN (VLAN) tagging and Quality of Service (QoS) mechanisms allows for efficient traffic management and prioritization, ensuring that critical applications receive the necessary bandwidth.

Furthermore, Cisco provides comprehensive management tools for the ASR 901, allowing network administrators to easily monitor and configure the router. Features like SNMP and NetFlow enable operators to gain insights into network performance and usage patterns, facilitating proactive management of their environments.

Overall, the Cisco Systems ASR 901 stands out as a powerful and flexible router, designed to meet the evolving demands of modern networks. Its combination of compact design, scalability, and advanced features positions it as an ideal solution for service providers and enterprises seeking reliable and efficient network solutions.
Top Page Image Contents