Cisco Systems ASR 901 manual Attaching the Rack-Mounting Brackets

Page 33

Chapter 3 Installing the Cisco ASR 901 Mobile Wireless Router

Mounting the Cisco ASR 901 Router

Attaching the Rack-Mounting Brackets

Complete the following tasks to install, replace, or rearrange the rack-mounting brackets so you can then mount the Cisco ASR 901 router in a 19-inch (48.3-cm) equipment rack. You can use the same rack-mounting brackets to front-mount the Cisco ASR 901 router in the equipment rack.

Step 1 Locate the mounting holes of the Cisco ASR 901 router.

Step 2 Align the rack-mounting bracket with the Cisco ASR 901 router and position with the four #6-32 x 0.25-inch screws (provided) (see Figure 3-1for front-mounting).

Figure 3-1 Attaching the Bracket for Front-Mounting

282344

1

1

Rack mount bracket

Step 3 Insert the screws (four places) and tighten using a Number 2 Phillips screwdriver.

Step 4 Repeat Steps 2 and 3 for the other rack-mounting bracket.

Proceed to the next section, “Mounting the Cisco ASR 901 Router in a Rack” to continue the installation.

Mounting the Cisco ASR 901 Router in a Rack

Typically, the Cisco ASR 901 router mounts to a 19-inch (48.3-cm) 2-post equipment rack with rack-mounting brackets that attach toward the front of the router sides. The inside width between the two posts or mounting strips (left and right) must be at least 17.72 to 17.80 inches [45 to 45.21 cm]. For more information about the equipment rack, see “Hardware Description” section on page 1-1.

No vertical clearance is necessary above or below the router when it is mounted in the rack.

To secure the Cisco ASR 901 router to the equipment rack, you must use the two mounting screws (provided) for each side or follow your local practices for installing the router into your equipment rack. Ensure that the rack-mount brackets are securely fastened. For more information, see the “Attaching the

Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide

 

OL-23778-01

3-3

 

 

 

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Cisco Systems, Inc Page Audience Enter a Directory and Determine the Current Directory Time of Day Pinouts OL-23778-01 Revision Date Change Summary Document Revision HistoryAudience ObjectivesOrganization ConventionsRelated Documentation Safety WarningsOL-23778-01 Hardware Description IntroductionCisco ASR 901 Router Front View Cisco ASR 901 Router-Front View Cisco ASR 901 Router Ethernet Version Front ViewFan Grounding Point Lug Cisco ASR 901 Router Rear ViewSafety Precautions Power SupplySpecification Value LEDsRTN Pin Connector aSystem Specifications Environmental Monitoring Temperature SensorPin Connector B Description SpecificationInterface Number Location Label Router Interface NumberingRegulatory Compliance OL-23778-01 Safety with Equipment Safety GuidelinesSafety with Electricity Preventing Electrostatic Discharge Damage Prerequisites Power Supply ConsiderationsSite Planning Site EnvironmentAir Flow Guidelines Method of ProcedureRequired Tools and Equipment Unpacking and Checking the Contents of your ShipmentTask Verified by Installation ChecklistCreating a Site Log Console Port ConsiderationsConsole Port Connections Task Verified by DatePreparing to Install the Router Console Port Considerations OL-23778-01 Network Modules Installing the Cisco ASR 901 Mobile Wireless RouterMounting the Cisco ASR 901 Router Rack-Mounting Configuration GuidelinesMounting the Cisco ASR 901 Router in a Rack Attaching the Rack-Mounting BracketsRack-Mounting Brackets section on Attaching the Cable GuidesGrounding the Cisco ASR 901 Router Connecting the Chassis Ground and PowerGrounding Point Stripping a Ground Wire Power Connection Compliance6-Pin Terminal Block Wiring the DC-Input Power SourceInstalling SFP Modules Installing and Removing SFP ModulesRemoving SFP Modules Installing an SFP Module into an SFP Module SlotConnecting the Console Port Connecting CablesConsole Port Types of RJ-45 CablesConnecting the Network Cables Connecting Gigabit Ethernet Interface CablesConnecting T1 and E1 Interface Cables Connecting SFP Cables Connecting Cables to the Bits InterfaceConnecting GPS Cables Connecting to Alarm Port Powering On the RouterConnecting to the Management Ethernet Port Dressing Router CablesPower-On Procedure Checklist for Power UpFormatting Procedures for Flash Memory Interpreting Front-Panel LEDsFile and Directory Procedures Displaying Contents of the Flash MemoryCopying Files Deleting Files from the Flash Memory Displaying File ContentEnter a Directory and Determine the Current Directory What to Do After Installing the HardwareOL-23778-01 Problem Solving TroubleshootingTroubleshooting the Power and Cooling Systems Environmental Reporting FeaturesSymptom Possible Cause Corrective Action Information Packet publication Troubleshooting Cables, and ConnectionsChassis LEDs Reading the LEDsCopper GE from Quad combo PHY ports contain Two Leds each System LEDSFP Ethernet Interface LEDs T1/E1 Interface LEDsRJ-45 Ethernet Interface LEDs Color/State Description two LEDs for each T1/E1 portOL-23778-01 Gigabit Ethernet Connector Pinouts Cable SpecificationsSFP Port Pinouts and Cable Specifications Pin FE Signal GE SignalT1/E1 Port Pinouts Console Port Signals and Pinouts Console Port Signals and PinoutsPin Signal Name Direction Description RJ-45-to-DB-9 Terminal Adapter Console Pin Signal Name HP Pins Direction DescriptionTerminal Adapter Device Signal RJ-45 Pin DB-25 Pin Identifying a Rollover CableConsole RJ-45-to-DB-25 Port DTE Bits Port Pinouts Time of Day PinoutsGPS Port Pinouts Pin Signal Name Description Alarm Port PinoutsManagement Ethernet Port Pinouts 10 MhzRxDP RxDN TxDP Not connected TxDN Site Log Initials DateNumerics IN-2 IN-3 IN-4

ASR 901 specifications

Cisco Systems ASR 901 is an advanced aggregation services router that is designed to meet the needs of service providers and enterprise networks. It offers a versatile platform suitable for various deployment scenarios ranging from mobile backhaul and broadband aggregation to IP edge routing. The ASR 901 is known for its compact size, energy efficiency, and robust performance, making it a preferred choice for operators looking to enhance their network infrastructure.

One of the main features of the Cisco ASR 901 is its small form factor, which facilitates installation in space-constrained environments. Its design allows for easy deployment in both indoor and outdoor settings, making it ideal for applications such as cell site backhaul and remote locations. The router supports a wide range of interfaces, including Ethernet and T1/E1, providing flexibility in connecting different network types.

The ASR 901 is built on Cisco's IOS XR software, ensuring a highly reliable and secure operating environment. This software is known for its scalability and robustness, providing operators with the ability to support large numbers of subscribers and high traffic volumes. The router also supports system redundancy features, ensuring continuous service availability and minimizing downtime.

In terms of performance, the Cisco ASR 901 delivers high throughput and low latency, which are crucial for delivering quality services like voice, video, and data. With its support for advanced network technologies such as MPLS and IPv6, the ASR 901 can effectively manage complex networking requirements while accommodating future growth.

Security is also a key consideration with the ASR 901. It includes features such as advanced encryption, access control lists, and intrusion prevention systems, aimed at protecting the integrity of network communications. Moreover, its support for Virtual LAN (VLAN) tagging and Quality of Service (QoS) mechanisms allows for efficient traffic management and prioritization, ensuring that critical applications receive the necessary bandwidth.

Furthermore, Cisco provides comprehensive management tools for the ASR 901, allowing network administrators to easily monitor and configure the router. Features like SNMP and NetFlow enable operators to gain insights into network performance and usage patterns, facilitating proactive management of their environments.

Overall, the Cisco Systems ASR 901 stands out as a powerful and flexible router, designed to meet the evolving demands of modern networks. Its combination of compact design, scalability, and advanced features positions it as an ideal solution for service providers and enterprises seeking reliable and efficient network solutions.
Top Page Image Contents