Cisco Systems and the ASA Services Module, ASA 5505 Show running-config uc-ime command, 20-19

Chapter 20 Configuring Cisco Intercompany Media Engine Proxy

Configuring Cisco Intercompany Media Engine Proxy

	Command	Purpose
Step 4	hostname(config-uc-ime)# ticket epoch n password	Configures the ticket epoch and password for Cisco
	password	Intercompany Media Engine.
	Example:	Where n is an integer from 1-255. The epoch
	hostname(config-uc-ime)# ticket epoch 1 password
	password1234	contains an integer that updates each time that the
		password is changed. When the proxy is configured
		the first time and a password entered for the first
		time, enter 1 for the epoch integer. Each time you
		change the password, increment the epoch to
		indicate the new password. You must increment the
		epoch value each time your change the password.
		Typically, you increment the epoch sequentially;
		however, the ASA allows you to choose any value
		when you update the epoch.
		If you change the epoch value, the current password
		is invalidated and you must enter a new password.
		Where password contains a minimum of 10 and a
		maximum of 64 printable character from the
		US-ASCII character set. The allowed characters
		include 0x21 to 0x73 inclusive, and exclude the
		space character.
		We recommend a password of at least 20 characters.
		Only one password can be configured at a time.
		The ticket password is stored onto flash. The output
		of the show running-config uc-ime command
		displays ***** instead of the password string.
		Note The epoch and password that you configure
		on the ASA must match the epoch and
		password configured on the Cisco
		Intercompany Media Engine server. See the
		Cisco Intercompany Media Engine server
		documentation for information.

Cisco ASA Series Firewall CLI Configuration Guide

20-19