Cisco Systems AIRSAP1602IAK95 specifications Access Point Ports and Connectors, Internal Antennas

AIR-ANT2524DG-R	Dual-resonant gray dipole	2/4
AIR-ANT2524V4C-R	Dual-resonant, ceiling-mount omni	2/4
	(4-port)
AIR-ANT2544V4M-R	Dual-resonant omni (4-port)	4/4
AIR-ANT2566P4W-R	Dual-resonant Directional antenna	6/6
	(4-port)

Internal Antennas

The 1602I model access points are configured with up to three dual-band inverted-F antennas and two 2.4-GHz/5-GHz dual-band radios.

Each antenna covers both the 2.4 GHz and the 5 GHz bands with a single feed line. The basic features are as follows:

•Dual-band inverted-F antenna for use in both the 2.4-GHz and 5-GHz bands.

•Antenna unit integrated into 1602I model access points.

•Peak gain is approximately 4 dBi in the 2.4-GHz band and approximately 4 dBi in the 5-GHz band.

Regulatory Domains

The 1600 series supports the following regulatory domains (shown as “x” in the model numbers):

•-A, -C, -E, -I, -K, -N, -Q, -R, -S, -T, -Z

Countries Supported

Click this URL to browse to a list of countries and regulatory domains supported by the 1600:

www.cisco.com/go/aironet/compliance

6Access Point Ports and Connectors

The 1602E model access points have external antenna connectors and the LED indictor on the top of the model, as shown in Figure 1. The 1602I model access points have integrated antennas and do not have external connectors on the top of the unit; however, they do have the LED indicator on top of the unit, as shown in Figure 2.

6