Cisco Systems 7576 quick start Connect DC-Input Power Supply

Page 15

Install the Hardware

Connect DC-Input Power Supply

13

ly

DC-input power su

 

with the terminal b

move

cover removed

 

 

 

Power leads

 

 

attached to

DC

FAN O

terminal block

OK

OK

(+)

Positive

 

 

(–)

Negative

 

 

(

) Ground

 

 

 

Conduit

 

 

 

bracket

 

 

 

 

 

I

 

 

0

 

Ca inst s

Warning The system power switch on the power supply should be off.

Step 1 Use a screwdriver to loosen and remove the terminal block cover screws.

Step 2 Lift and remove the terminal block cover.

Step 3 Route the DC-input power cable from the power source through the conduit bracket on the power supply. Allow sufficient slack in the cable.

Step 4 Attach and tighten the conduit to the conduit bracket.

Note The proper wiring sequence is ground to ground, positive to positive (line to L), negative to negative (neutral to N). The ground wire should always be connected first and disconnected last.

Image 15
Contents Quick Start Guide Page Packing List Install the HardwareFor rack-mounting optional Prepare to Install the RouterInstall the Router on a Bench or Tabletop Rack-Mount the Router Recommended Mount Brackets to the Rack Posts Secure the Spacers Attach the Chassis Ears Mount the Chassis in the Rack Install Interface Processors, Fillers, VIPs, or RSPs Attach the Cable-Management Bracket Install Power Supplies in the Router Connect AC-Input Power Supply Connect DC-Input Power Supply Page Connect the RSP Connect the Console and the Auxiliary Y-Cables Start and Configure the System Start a Basic Configuration Perform a Basic Configuration Using Setup Configure an Ethernet Interface Extended AppleTalk network? no AppleTalk network number Perform a Basic Configuration Using Configuration Mode Flash Memory Cards Install Field Replaceable Units FRUsCopy Files to Flash Memory Format a Flash Memory CardEnable Booting from Flash Memory Make a Flash Memory Card Image BootablePrepare to Remove and Install an RSP Stop Check the RSP Installation Check the Interface Processor or VIP Installation Page Copy the Configuration File for an RSP Writing Router-confg Retrieve the Configuration File for RSPs Systemrunning-config Nvramstartup-config command Remove and Install Port Adapters Page Screw Page Remove and Replace the Power Supply H2530 Page Headquarters

7576 specifications

Cisco Systems 7576, part of the Catalyst line of switches, is designed for enterprise networks requiring robust performance and advanced features. This switch is known for its versatility, scalability, and reliability, making it a smart choice for organizations looking to support a wide range of applications.

One of the standout features of the Cisco 7576 is its capability to handle high throughput. With a switching capacity that exceeds traditional network switches, it accommodates heavy traffic loads, ideal for environments with dense users and devices. This throughput is complemented by support for advanced Layer 2 and Layer 3 protocols, including VLANs, Spanning Tree Protocol (STP), and Open Shortest Path First (OSPF), offering a diverse set of routing options.

The Cisco 7576 also prioritizes security, integrating several advanced security features. With support for Cisco TrustSec, it provides segmentation and access control based on user identity, ensuring that sensitive data remains protected. Additionally, the switch supports features like 802.1X port-based authentication and dynamic VLAN assignment, enhancing overall network security.

Another notable characteristic of the Cisco 7576 is its energy-efficiency. Equipped with Energy Efficient Ethernet (EEE), it helps reduce power consumption during low traffic periods, aligning with modern enterprises' sustainability goals. This focus on green technology is increasingly essential as organizations seek to minimize their environmental footprint.

Cisco's investment in automation and management is also evident in the 7576. The switch is compatible with Cisco DNA Center, which allows for intelligent operations and insights into the network. This integration enables real-time monitoring, automation of routine tasks, and proactive management of network issues, leading to lower operational costs and improved network performance.

Furthermore, the Cisco 7576 supports advanced Quality of Service (QoS) features, essential for environments that rely on voice and video applications. Administrators can prioritize bandwidth effectively, ensuring that critical applications receive the necessary resources for optimal performance.

In conclusion, the Cisco Systems 7576 switch merges superior performance and security features with energy efficiency and intelligent management options. It stands as a robust solution for enterprises seeking to build resilient, scalable, and secure networks that can evolve with their business needs.