Retrieve the Conﬁguration File for RSPs

Install Field Replaceable Units (FRUs)

Retrieve the Conﬁguration File for RSPs

Retrieve the saved conﬁguration and copy it to NVRAM by accessing the router through a console terminal, or from a remote terminal.

Step 1 Enter the enable command at the EXEC prompt (>), and then enter a privileged-level password, as follows:

Router> enable

Password:

Router#

Note The router runs from the default conﬁguration in NVRAM until the previous conﬁguration is retrieved. Passwords conﬁgured on the previous system are not valid until they are retrieved.

Step 2 Enter the ping command followed by the name or IP address of the remote server, and then press Return to check the connection between the router and the remote host.

Step 3 Enter the copy tftp startup-conﬁgcommand and press Return to enter the conﬁguration mode and specify that you will conﬁgure the system from a network device (instead of from the console terminal, which is the default).

Router# copy tftp startup-config

Step 4 Enter the IP address or name of the remote host (the remote TFTP server to which you originally saved the conﬁguration ﬁle).

Address of remote host [255.255.255.255]? 10.1.1.1

Step 5 Enter the name of the conﬁguration ﬁle. The default is to use the name of the router with the sufﬁx -confg(Router-confg in the following example). If you speciﬁed a different ﬁlename when you copied the conﬁguration, enter the ﬁlename; otherwise, press Return to accept the default.

Name of configuration file [Router-confg]?

Step 6 Before the system reloads the new conﬁguration ﬁle in NVRAM, it displays the instructions you entered for conﬁrmation. If the instructions are not correct, enter n (no), and then press Return to cancel the process. To accept the instructions, press Return, or press y and then press Return. Output similar to the following appears:

Configure using Router-confg from 10.1.1.1? [confirm]

Loading Router-confg from 10.1.1.1: ! ! [OK - 1186/126927 bytes]

Warning: distilled config is not generated [OK]

%SYS-5-CONFIG_NV: Non-volatile store configured from Router-confg by console tftp from 10.1.1.1

7576 specifications

Cisco Systems 7576, part of the Catalyst line of switches, is designed for enterprise networks requiring robust performance and advanced features. This switch is known for its versatility, scalability, and reliability, making it a smart choice for organizations looking to support a wide range of applications.

One of the standout features of the Cisco 7576 is its capability to handle high throughput. With a switching capacity that exceeds traditional network switches, it accommodates heavy traffic loads, ideal for environments with dense users and devices. This throughput is complemented by support for advanced Layer 2 and Layer 3 protocols, including VLANs, Spanning Tree Protocol (STP), and Open Shortest Path First (OSPF), offering a diverse set of routing options.

The Cisco 7576 also prioritizes security, integrating several advanced security features. With support for Cisco TrustSec, it provides segmentation and access control based on user identity, ensuring that sensitive data remains protected. Additionally, the switch supports features like 802.1X port-based authentication and dynamic VLAN assignment, enhancing overall network security.

Another notable characteristic of the Cisco 7576 is its energy-efficiency. Equipped with Energy Efficient Ethernet (EEE), it helps reduce power consumption during low traffic periods, aligning with modern enterprises' sustainability goals. This focus on green technology is increasingly essential as organizations seek to minimize their environmental footprint.

Cisco's investment in automation and management is also evident in the 7576. The switch is compatible with Cisco DNA Center, which allows for intelligent operations and insights into the network. This integration enables real-time monitoring, automation of routine tasks, and proactive management of network issues, leading to lower operational costs and improved network performance.

Furthermore, the Cisco 7576 supports advanced Quality of Service (QoS) features, essential for environments that rely on voice and video applications. Administrators can prioritize bandwidth effectively, ensuring that critical applications receive the necessary resources for optimal performance.

In conclusion, the Cisco Systems 7576 switch merges superior performance and security features with energy efficiency and intelligent management options. It stands as a robust solution for enterprises seeking to build resilient, scalable, and secure networks that can evolve with their business needs.