Cisco Systems 7576 quick start Secure the Spacers

Page 8

6

Install the Hardware

Secure the Spacers

A

C

B

53425

Step 1

Loosen the 10-32 x 5/8-inch LG Phillips

Step 5 Push the brackets as far apart as possible

 

pan-head screw at the end of the ledge of

before tightening the screws.

 

the right-side bracket. This screw is the

Step 6 Use a Number 2 Phillips screwdriver to

 

anchor for the spanner bar.

 

tighten the six pan-head screws that

 

 

Step 2

Remove the tape that secures the spanner

secure the brackets to the rack-mounting

 

bar on the left bracket, and swing the bar

posts, and the two anchor screws that

 

down (see A) over the anchor screw on the

secure the spanner bars.

 

opposite bracket (see B).

Step 7 Adjust the brackets if the distance

 

 

Step 3

If the spanner bar does not reach the

between them is less than 17.5 inches

 

opposite bracket, loosen the pan-head

(44.45 cm).

 

screws to allow more play between the

 

 

brackets, and adjust brackets as needed.

 

Step 4

Repeat Step 1 through Step 3 to fasten the

 

 

remaining spanner bar to its anchor screw.

 

 

(See C.)

 

Image 8
Contents Quick Start Guide Page Install the Hardware Packing ListPrepare to Install the Router For rack-mounting optionalInstall the Router on a Bench or Tabletop Rack-Mount the Router Recommended Mount Brackets to the Rack Posts Secure the Spacers Attach the Chassis Ears Mount the Chassis in the Rack Install Interface Processors, Fillers, VIPs, or RSPs Attach the Cable-Management Bracket Install Power Supplies in the Router Connect AC-Input Power Supply Connect DC-Input Power Supply Page Connect the RSP Connect the Console and the Auxiliary Y-Cables Start and Configure the System Start a Basic Configuration Perform a Basic Configuration Using Setup Configure an Ethernet Interface Extended AppleTalk network? no AppleTalk network number Perform a Basic Configuration Using Configuration Mode Install Field Replaceable Units FRUs Flash Memory CardsFormat a Flash Memory Card Copy Files to Flash MemoryMake a Flash Memory Card Image Bootable Enable Booting from Flash MemoryPrepare to Remove and Install an RSP Stop Check the RSP Installation Check the Interface Processor or VIP Installation Page Copy the Configuration File for an RSP Writing Router-confg Retrieve the Configuration File for RSPs Systemrunning-config Nvramstartup-config command Remove and Install Port Adapters Page Screw Page Remove and Replace the Power Supply H2530 Page Headquarters

7576 specifications

Cisco Systems 7576, part of the Catalyst line of switches, is designed for enterprise networks requiring robust performance and advanced features. This switch is known for its versatility, scalability, and reliability, making it a smart choice for organizations looking to support a wide range of applications.

One of the standout features of the Cisco 7576 is its capability to handle high throughput. With a switching capacity that exceeds traditional network switches, it accommodates heavy traffic loads, ideal for environments with dense users and devices. This throughput is complemented by support for advanced Layer 2 and Layer 3 protocols, including VLANs, Spanning Tree Protocol (STP), and Open Shortest Path First (OSPF), offering a diverse set of routing options.

The Cisco 7576 also prioritizes security, integrating several advanced security features. With support for Cisco TrustSec, it provides segmentation and access control based on user identity, ensuring that sensitive data remains protected. Additionally, the switch supports features like 802.1X port-based authentication and dynamic VLAN assignment, enhancing overall network security.

Another notable characteristic of the Cisco 7576 is its energy-efficiency. Equipped with Energy Efficient Ethernet (EEE), it helps reduce power consumption during low traffic periods, aligning with modern enterprises' sustainability goals. This focus on green technology is increasingly essential as organizations seek to minimize their environmental footprint.

Cisco's investment in automation and management is also evident in the 7576. The switch is compatible with Cisco DNA Center, which allows for intelligent operations and insights into the network. This integration enables real-time monitoring, automation of routine tasks, and proactive management of network issues, leading to lower operational costs and improved network performance.

Furthermore, the Cisco 7576 supports advanced Quality of Service (QoS) features, essential for environments that rely on voice and video applications. Administrators can prioritize bandwidth effectively, ensuring that critical applications receive the necessary resources for optimal performance.

In conclusion, the Cisco Systems 7576 switch merges superior performance and security features with energy efficiency and intelligent management options. It stands as a robust solution for enterprises seeking to build resilient, scalable, and secure networks that can evolve with their business needs.