Cisco Systems 7576 quick start Connect the Console and the Auxiliary Y-Cables

Page 18

Connect the RSP

Connect the Console and the Auxiliary Y-Cables

external

AUXILIARY

DB-25 fe

Auxiliary

sole terminal

CONSOLE

DB-25

Consol

to cons

RSPs in

y equipment

AUXILIARY

to auxili RSPs in

DB-25 fe

H9721

CONSOLE

DB-25

H9720

Step 1 Connect the DB-25 male end of the Y-cable to the external auxiliary equipment.

16

The console and auxiliary Y-cables allow you to simultaneously connect the console or auxiliary ports on two RSP2s, RSP4s, or RSP8s to a single console terminal or external auxiliary device. These are configured as system master and slave in RSP slots 6 and 7 in the Cisco 7513.

Step 1 Connect the DB-25 female end of the Y-cable to the console terminal device.

Step 2 Connect one DB-25 male end of the Y-cable to an RSP or other external auxiliary device.

Step 3 Repeat Step 2 for the other RSP or other external device.

Step 2 Connect one DB-25 female end of the Y-cable to auxiliary ports on an RSP in an RSP slot.

Step 3 Repeat Step 2 for the auxiliary ports on a second RSP in an RSP slot.

Step 4 Connect the interface processors or VIPs to the external network. Refer to the appropriate processor module manual, such as the Route Switch Processor (RSP4/4+) Installation and Configuration Guide.

Image 18
Contents Quick Start Guide Page Install the Hardware Packing ListPrepare to Install the Router For rack-mounting optionalInstall the Router on a Bench or Tabletop Rack-Mount the Router Recommended Mount Brackets to the Rack Posts Secure the Spacers Attach the Chassis Ears Mount the Chassis in the Rack Install Interface Processors, Fillers, VIPs, or RSPs Attach the Cable-Management Bracket Install Power Supplies in the Router Connect AC-Input Power Supply Connect DC-Input Power Supply Page Connect the RSP Connect the Console and the Auxiliary Y-Cables Start and Configure the System Start a Basic Configuration Perform a Basic Configuration Using Setup Configure an Ethernet Interface Extended AppleTalk network? no AppleTalk network number Perform a Basic Configuration Using Configuration Mode Install Field Replaceable Units FRUs Flash Memory CardsFormat a Flash Memory Card Copy Files to Flash MemoryMake a Flash Memory Card Image Bootable Enable Booting from Flash MemoryPrepare to Remove and Install an RSP Stop Check the RSP Installation Check the Interface Processor or VIP Installation Page Copy the Configuration File for an RSP Writing Router-confg Retrieve the Configuration File for RSPs Systemrunning-config Nvramstartup-config command Remove and Install Port Adapters Page Screw Page Remove and Replace the Power Supply H2530 Page Headquarters

7576 specifications

Cisco Systems 7576, part of the Catalyst line of switches, is designed for enterprise networks requiring robust performance and advanced features. This switch is known for its versatility, scalability, and reliability, making it a smart choice for organizations looking to support a wide range of applications.

One of the standout features of the Cisco 7576 is its capability to handle high throughput. With a switching capacity that exceeds traditional network switches, it accommodates heavy traffic loads, ideal for environments with dense users and devices. This throughput is complemented by support for advanced Layer 2 and Layer 3 protocols, including VLANs, Spanning Tree Protocol (STP), and Open Shortest Path First (OSPF), offering a diverse set of routing options.

The Cisco 7576 also prioritizes security, integrating several advanced security features. With support for Cisco TrustSec, it provides segmentation and access control based on user identity, ensuring that sensitive data remains protected. Additionally, the switch supports features like 802.1X port-based authentication and dynamic VLAN assignment, enhancing overall network security.

Another notable characteristic of the Cisco 7576 is its energy-efficiency. Equipped with Energy Efficient Ethernet (EEE), it helps reduce power consumption during low traffic periods, aligning with modern enterprises' sustainability goals. This focus on green technology is increasingly essential as organizations seek to minimize their environmental footprint.

Cisco's investment in automation and management is also evident in the 7576. The switch is compatible with Cisco DNA Center, which allows for intelligent operations and insights into the network. This integration enables real-time monitoring, automation of routine tasks, and proactive management of network issues, leading to lower operational costs and improved network performance.

Furthermore, the Cisco 7576 supports advanced Quality of Service (QoS) features, essential for environments that rely on voice and video applications. Administrators can prioritize bandwidth effectively, ensuring that critical applications receive the necessary resources for optimal performance.

In conclusion, the Cisco Systems 7576 switch merges superior performance and security features with energy efficiency and intelligent management options. It stands as a robust solution for enterprises seeking to build resilient, scalable, and secure networks that can evolve with their business needs.