Cisco Systems 806 manual Connecting to the Internet, Connecting a Broadband Modem

Page 29

Chapter 2 Installation

Installing Your Router

Connecting to the Internet

You can use an installed broadband modem or Ethernet switch to connect to the Internet.

Connecting a Broadband Modem

To connect to an installed DSL, cable, or long-reach Ethernet modem, follow the steps in Figure 2-4.

Warning Do not work on the system or connect or disconnect cables during periods of lightning activity.

Figure 2-4 Connecting to a Broadband Modem

TO HUB	ETHERNET	10BASET
TO PC		10BASET	COMPUTERS (E0)
TO PC

	4	3
		3	2
			1

Model

CONSOLE

Cisco 806

ETHERNET
10BASET	+5 VDC
	+5 VDC
INTERNET (E1)

1.Connect yellow cable to ETHERNET INTERNET port.

ERL-575 oc s iC

56958

2. Connect other end to modem.

Follow the instructions provided with your broadband modem to determine which port on the modem to connect to.

		Cisco 806 Router Hardware Installation Guide
		Cisco 806 Router Hardware Installation Guide
	78-10432-01			2-9
	78-10432-01			2-9

Image 29

Contents Cisco 806 Router Hardware Installation Guide Page Cisco 806 Router Hardware Installation Guide Page LEDs FeaturesProduct Overview Installation Vii Viii Organization AudienceConventions Preface Conventions World Wide Web Related DocumentationObtaining Documentation Documentation Feedback Documentation CD-ROMOrdering Documentation Cisco.com Obtaining Technical AssistanceTechnical Assistance Center Contacting TAC by Using the Cisco TAC WebsiteXvi Feature Description FeaturesFront Panel Router OverviewCable lock Ethernet ports Back PanelColor Function LEDsSafety Preparing for InstallationBefore installing the router, read the following warnings Preventing Electrostatic Discharge Damage Items Included with Router Unpacking the BoxPreventing Router Damage Installing Your RouterNetwork Device Router Button Ethernet Cable Connecting Ethernet DevicesConnecting a Hub Connecting a Server, PC, or Workstation Connecting a Broadband Modem Connecting to the InternetConnecting an Ethernet Switch Connecting a Terminal or PC to the Console PortTo connect the power supply, follow the steps in Figure Connecting the Power SupplyPower/Link LEDs to Check Normal Patterns Verifying Your Router InstallationMounting on Table Mounting Your RouterWall-Mounting Brackets Bottom of Router Mounting on WallInstallation Mounting Your Router Mounting Router On Wall Http//10.10.10.1 Where to Go from HereCisco 806 Router Hardware Installation Guide Before You Call Your Cisco Reseller TroubleshootingSymptom Problem Solutions Problems During Initial StartupComputer Problems After Router Is RunningTroubleshooting Problems After Router Is Running Environmental Operating Ranges System SpecificationsDescription Design Specification Physical Dimensions National laws and regulations Port Connector PinoutsDescription Design Specification Router Power Pin Function Function To HUB/TO PC Button Pin Position OUT PositionEthernet Cable Specifications Cabling SpecificationsCable Maximum Distance Maximum Cable DistancesType Category Shielding Appendix a Specifications and Cables Cabling Specifications Numerics GL-2 GL-3 GL-4 D E IN-2 IN-3 IN-4 Router Wall-Mount Template