Cisco Systems 806 manual GL-4

Glossary

T

TNV	Telecommunications network voltage. A secondary circuit that under normal
	operating conditions carries telecommunication signals. Telecommunications
	signals are a steady-state, varying amplitude, or intermittent voltage or current
	intended for use on a telecommunications network. A telecommunications
	network is considered a metallically terminated circuit intended to carry
	telecommunication signals for voice, data, or other communication. These
	networks might be publicly or privately owned. They might be subjected to
	overvoltages due to atmospheric discharges or power-line failures.
TO HUB/TO PC	A button that enables you to use a straight-through cable to connect either hubs,
button	or servers, PCs, and workstations to the router. Without this button, you would
	need to supply a crossover cable to connect a hub to the router. Setting the button
	to TO HUB (in) indicates that you are connecting a hub; setting the button to TO
	PC (out) indicates that you are connecting a server, PC, or workstation.

	Cisco 806 Router Hardware Installation Guide
GL-4	78-10432-01