14-14

Chapter 14 Using Notifications

Configuring Notifications

Step 3 Edit the information on the page, described in the following table.

GUI Element	Description/Action
Notification Criterion field	Enter a name for the notification criterion.

Destination fields	(Optional). To generate notifications for alerts and events on call
	destinations, do the following:
	1.	Select an operator (Is Exactly, Contains, Begins With, Any).
	2.	Enter an appropriate value: Phone extension or IP address for an
		endpoint, such as a voice gateway or a phone.

Source fields	(Optional). To generate notifications for alerts and events on call sources,
	do the following:
	1.	Select an operator (Is Exactly, Contains, Begins With, Any).
	2.	Enter an appropriate value: Phone extension or IP address for a voice
		gateway or a phone.

Cisco 1040 ID fields	(Optional). To generate notifications for alerts and events on particular
	Cisco 1040s, do the following:
	1.	Select an operator (Is Exactly, Contains, Begins With, Any).
	2.	Enter the ID for a Cisco 1040. These typically start with a letter
		followed by 3 digits, for example A100.

Phone Model list	(Optional). To generate notifications for alerts and events on particular
	phone models, enter a comma-separated list of Cisco IP phone models or
	select them from a list:
	1.	Click the icon to open a selector.
	2.	Select a phone model from the list. To select more than one phone
		model, hold down Ctrl while selecting.
	3.	Click OK.

Alert Severity check boxes	Select any:
	•	Critical.
	•	Warning.
	•	Informational.

Alert Status check boxes	Select any:

•Active.

•Cleared.

Event Severity check boxes Select any:

•Critical.

•Warning.

•Informational.

	User Guide for Cisco Unified Operations Manager
14-14	OL-10041-01