Cisco Systems uBR10-LCP2-MC16E, uBR10-LCP2-MC16S, uBR10-LCP2-MC16C Connecting the Cables

Page 27

Troubleshooting the Cisco uBR10-LCP2-MC16x Cable Interface Line Card

Step 4 Simultaneously pivot both ejector levers toward each other (until they are parallel to the faceplate) to firmly seat the card in the backplane (Figure 11 on page 22).

Step 5 Secure the cable interface line card in the chassis by tightening the top and bottom captive screws (see Figure 7 on page 18).

Caution To ensure that there is adequate space for additional cable interface line cards, always tighten the captive screws on each newly installed card before you insert any additional cards. These screws prevent accidental removal and provide proper grounding for electromagnetic interference (EMI) shielding.

Connecting the Cables

When fully inserted, the cable interface line card cycles through its power-on self-test. The Power LED is on (green) and the Status LED turns yellow. If the card is operating correctly, the Status LED then turns green. If these LEDs do not operate as described, see the “Troubleshooting the

Cisco uBR10-LCP2-MC16x Cable Interface Line Card” section on page 27 and the Cisco uBR10012 Universal Broadband Router Hardware Installation Guide at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/cable/ubr10k/index.htm.

Step 1 Connect all downstream and upstream coaxial cables to the cable interface line card, as necessary.

Step 2 Configure the cable interface line card, if necessary.

For information about configuring the cable interface line card, refer to the Cisco uBR10012 Universal Broadband Router Software Configuration Guide at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/cable/ubr10k/ubr10012/scg/index.htm

See the release notes at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/cable/cab_rout/cfig_nts/10494hmc.htm.

Troubleshooting the Cisco uBR10-LCP2-MC16x Cable Interface Line Card

To help isolate a problem with a card, check the following:

Step 1 Are all enabled LEDs on?

If yes, the system is operational.

Step 2 Are any enabled LEDs off?

a.If the enabled LED on a cable interface line card is off, first verify that the card has been enabled and configured for operations. The enabled LED remains off when a card has not been configured and enabled.

Cisco uBR10-LCP2-MC16C/MC16E/MC16S Cable Interface Card for the Cisco uBR10012 Router

 

OL-2872-02

27

 

 

 

Page 26 Page 28
Image 27
Page 26 Page 28
Contents OL-2872-02 June Cisco uBR10-LCP2-MC16C/MC16E/MC16S Overview QPSK, 16 QAM Cisco uBR10-LCP2-MC16C Docsis and EuroDOCSIS Data Rates and Modulation SchemesCisco uBR10-LCP2-MC16S Cisco uBR10-LCP2-MC16ECH OC-12-DSO SM-IR Physical DescriptionCisco uBR10-LCP2-MC16C Cable Interface Line Card Components LED Cisco uBR10-LCP2-MC16x LEDsMGR ACT Technical SpecificationsSafety Information and Warnings Electrical Equipment GuidelinesPreventing Electrostatic Discharge Damage Säilytä Nämä Ohjeet Bewaar Deze InstructiesTA Vare PÅ Disse Instruksjonene Conservez CES InformationsBewahren SIE Diese Hinweise GUT AUF Conservare Queste IstruzioniSpara Dessa Anvisningar Guarde Estas InstruccionesGEM Disse Anvisninger Page OL-2872-02 Removing a Cisco uBR10-LCP2-MC16x Cable Interface Line Card Unpacking a Cisco uBR10-LCP2-MC16x Cable Interface Line CardLocating the Captive Screws Opening the Ejector Levers Card carrier to support the weight of the card Inserting the Cable Interface Line Card Closing the Ejector Levers Connecting the CablesReplacing the Line Card in the Cisco uBR10-LCP2 Adapter Card Removing the Nuts and Washers Ejecting the Cable Interface Line Card from the Adapter Card Replacing the Line Card in the Cisco uBR10-LCP2 Adapter Card Connecting the Cables Related Documentation Obtaining Documentation Cisco.comOrdering Documentation Cisco Technical Support Website Submitting a Service RequestDocumentation Feedback Obtaining Technical AssistanceObtaining Additional Publications and Information Definitions of Service Request SeverityObtaining Additional Publications and Information

MC16S, uBR10-LCP2-MC16C, uBR10-LCP2-MC16E, uBR10-LCP2-MC16S, MC16E specifications

Cisco Systems has long been a leader in providing robust networking solutions, and its line of Modular Converged Broadband Routers (MCBR) reflects this commitment to performance and innovation. Among these offerings is the MC16E, alongside the uBR10-LCP2-MC16S, uBR10-LCP2-MC16E, and uBR10-LCP2-MC16C. These models are designed to meet the diverse demands of modern broadband networks, enabling service providers to efficiently manage data, voice, and video services.

The MC16E serves as a highly scalable platform that is capable of supporting high-density cable applications. Its architecture supports advanced features such as multiview video streaming, high-speed data transfer, and Voice over IP (VoIP) support. With a focus on maximizing bandwidth and ensuring reliable service delivery, the MC16E is optimized for applications requiring significant network resources.

The uBR10-LCP2-MC16S, uBR10-LCP2-MC16E, and uBR10-LCP2-MC16C are integral components of the uBR10 series, designed to enhance the capabilities of the cable provider’s network. These models feature specialized Line Card Platforms (LCP) that provide modular flexibility and computational power. The LCP allows for easy integration and upgrading, ensuring that the network can adapt to future technology advancements and increased demand.

One of the standout features of these devices is their support for DOCSIS 3.1 technology. This enables service providers to deliver high-speed internet services with impressive download and upload speeds, reducing latency and improving overall user experience. In addition, the routers are equipped with advanced Quality of Service (QoS) mechanisms, enabling better prioritization of critical data traffic, which is essential for maintaining service quality, especially in mixed-service environments.

Another characteristic of these routers is their redundancy and reliability features. With options for network backup and failover mechanisms, service providers can ensure uninterrupted service, a critical requirement in today’s always-on digital environment.

The MC16S model is particularly noteworthy due to its dual-mode operation, supporting both IPv4 and IPv6, which is essential as networks transition to newer internet protocols. Cisco's continued innovation ensures that these routers stay relevant in a fast-paced technological landscape.

In summary, Cisco's MC16E, uBR10-LCP2-MC16S, uBR10-LCP2-MC16E, and uBR10-LCP2-MC16C provide a powerful and flexible solution for modern broadband networks. With high scalability, advanced QoS features, and robust support for new protocols, these devices are key to enhancing service delivery for providers looking to stay ahead in the competitive broadband market.
Top Page Image Contents