Cisco Systems OL-7064-01 manual General Information, Linkset Type, Inbound ACL, Outbound ACL

Page 21

Chapter 8 Working with Linksets

Viewing Detailed Information for a Linkset

General Information

The General Information sub-section contains the following fields:

Field

Description

 

 

Linkset Type

Type of linkset, which SGM determines by examining the links defined in the

 

linkset. Possible linkset types are:

 

• HSL—The links in this linkset use the SS7-over-ATM (Asynchronous

 

Transfer Mode) high-speed protocol.

 

• SCTPIP—The links in this linkset use the Stream Control Transmission

 

Protocol (SCTP) IP transport protocol.

 

• Serial—The links in this linkset use the serial SS7 signaling protocol.

 

• Mixed—The links in this linkset are of two or more types. (This

 

configuration is not recommended.)

 

• Virtual—The links in this linkset are virtual links, which connect

 

signaling point instances running on the same device. SGM does not poll

 

virtual linksets, nor does it display real-time data or accounting statistics

 

for virtual linksets.

 

Note Prior to IOS release 12.2(23)SW1, virtual linksets on multi-instance

 

routers were created manually by the user. Within and after that

 

release, virtual linksets are created automatically.

 

• Other—No links have been defined for this linkset.

 

 

Inbound ACL

Inbound IP access control list (ACL) number for the linkset.

 

If there is no inbound ACL for the linkset, this field displays 0.

 

If the linkset is a Virtual linkset, this field displays N/A.

 

 

Outbound ACL

Outbound ACL number for the linkset.

 

If there is no outbound ACL for the linkset, this field displays 0.

 

If the linkset is a Virtual linkset, this field displays N/A.

 

 

 

 

Cisco Signaling Gateway Manager User Guide

 

 

 

 

 

 

OL-7064-01

 

 

8-21

 

 

 

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Working with Linksets Viewing Basic Information for Linksets Right-Click Menu for a Specific Linkset Right-Click Menu for All LinksetsDelete Confirm Deletions checkbox in the Startup/ExitGo To SP View Real-Time Data and Charts View Configuration DetailsGo To Node View ComponentsEvent History Snmp Trap Messages Drill-Down Linkset Access ListEvent History Status and Trap Event History Network StatusLinkset Table Active Links LinksCongested Links IgnoredDisplay the event icon in this field EventsLast Status Date and time that the status of the linkset last changedSection on page A-5 Viewing Detailed Information for a Linkset Linkset Details Right-Click Menu Opens the Linkset Details Window for the selected linksetA new window Deleting a Node section on page 6-100for more Go To Node Event History Snmp Trap Messages Linkset Linkset Details ComponentsSelect the checkbox to exclude the link Type Type of link. Possible link types areIndicates whether there is a note associated with the link Event icon in this field Section on page A-4 Naming Information Linkset Details Configuration DataStatus Information Is IgnoredStatus DescriptionCurrent status of the linkset. Possible values are Status ReasonLinkset Type General InformationInbound ACL Outbound ACLLinkset Details Recent Events Linkset Details NotesLinks Information Links Information sub-section contains the following fieldsApply Filter Set FilterRemove Filter PauseTime Difference Adjust Row HeightFind Create Sound FilterCategory Message Name SeverityTime Ack ByProbe Conn Linkset Details Linkset Access ListsProbe Link MessagePoll Interval Access ListLast Poll OutPoll Interval secs Linkset Statistics Details Poll SettingsSeconds Current Poll IntervalLinkset Statistics Details Notes Linkset Statistics Details Configuration DataLinkset Statistics Details Linkset Access Lists Linkset Statistics Details Recent EventsLinkset Statistics Details Statistics Bit Information or Byte Information Packet InformationSent Per Sec Received Per SecSend Plan Capacity Utilization InformationSend Utilization % Send Utilization % = Bits Sent Per Sec/Planned CapacityPlan-capacity CS7 linkset configuration command Receive Plan CapacityReceive Utilization % Service Information Linkset Statistics Details ChartsReceivedUtilization ReceivedUtilization Chart for a LinksetAdjacent linkset, select it in this list box Received Utilization ChartTime Window mins MinutesReceived Utilization ChartShow threshold line ResetFor Scale to thresholdSendUtilization Utilization ChartDd.dd is the send utilization percentage for that data point Send UtilizationThreshold for the selected link PktsRcvdPerSec chart Packets Received ChartPktsRcvdPerSec Received Chart To return the data to the chart, click the icon againReturn the data to the chart, click the icon again Packets ReceivedPktsSentPerSec chart Packets Sent ChartPktsSentPerSec Sent Chart Received Chart or Bytes Received Chart BitsRcvdPerSec or BytesRcvdPerSec chartBitsRcvdPerSec or BytesRcvdPerSec Following fields and buttonsBytes Received Chart As a function of time, including data for up to 16 linksReceived per second for that data point BytesSentPerSec chart Sent Chart or Bytes Sent ChartBitsSentPerSec or BytesSentPerSec Chart or Bytes Sent Chart Bytes Sent ChartFunction of time, including data for up to 16 links Sent per second for that data pointDrops tab. SGM displays the Drops chart Drops chart contains the following fields and buttonsDrops Drops Chart To 16 linksDd.dd is the number of drops for that data point Save CancelDeleting a Linkset from Your Network Viewing Notes for a LinksetDeleting a Linkset from the SGM Database Ignoring a Linkset Viewing the Network Status Linkset Dashboard Viewing Ignored LinksetsLast Update Header Update IntervalAccess Lists Server NameViewing ITP Linkset Status Section on page A-5 Status Reason Related Topic Viewing ITP Linkset DetailsSGM Linkset Details Table Latest Reports Link PeaksDescription Poll Error Message Adjacent Signaling PointAdjacent Point Code Packets Received Per Sec GTT Accounting EnabledPackets Sent Per Sec Bits Received Per SecPlanned Capacity for ITP Not Set Receive UtilizationCapacity for ITP Not Set Displays Set Plan Capacity on ITPFor a linkset of type Serial or HSL, available bandwidth for Send Utilization = Bits Sent Per Sec./Planned CapacityIf Send Plan Capacity is not set on the ITP for one or more SGM Links Detail Table Signaling link code SLC ID for the linkInterface Name PortsUtilization CongestionEither a utilization percentage or a number of Erlangs Bits/SecViewing ITP Linkset Information Access Lists Node Name Node, signaling point, or linkset nameName, and Linkset Header Server Name Header Node/SP/LinksetOL-7064-01
Top Page Image Contents