Cisco Systems OL-7064-01 manual Poll Error Message, Adjacent Signaling Point, Adjacent Point Code

Page 65

Chapter 8 Working with Linksets

Viewing Linkset Information Using a Web Browser

	Field	Description

	Poll Error Message	Last error message received by the linkset. If there have been no polling
		errors, this field is not displayed.

	Local Point Code	Point code of the primary signaling point for the linkset.

	Adjacent Node	Name of adjacent node for the linkset. To see detailed information for
		the adjacent node, click the node name.

	Adjacent Signaling Point	Name of adjacent signaling point for the linkset. To see detailed
		information for the adjacent signaling point, click the signaling point
		name.

	Adjacent Point Code	Point code of the adjacent signaling point for the linkset.

	Linkset Type	Type of linkset, which SGM determines by examining the links defined
		in the linkset. Possible linkset types are:
		• HSL—The links in this linkset use the SS7-over-ATM
		(Asynchronous Transfer Mode) high-speed protocol.
		• SCTPIP—The links in this linkset use the Stream Control
		Transmission Protocol (SCTP) IP transport protocol.
		• Serial—The links in this linkset use the serial SS7 signaling
		protocol.
		• Mixed—The links in this linkset are of two or more types. (This
		configuration is not recommended.)
		• Virtual—The links in this linkset are virtual links, which connect
		signaling point instances running on the same device. SGM does not
		poll virtual linksets, nor does it display real-time data or accounting
		statistics for virtual linksets.
		Note Prior to IOS release 12.2(23)SW1, virtual linksets on
		multi-instance routers were created manually by the user. Within
		and after that release, virtual linksets are created automatically.
		• Other—No links have been defined for this linkset.

	Links	Total number of links in the linkset.

	Active Links	Number of links in the linkset that are Active.

	Congested Links	Number of links in the linkset that are Congested.

	Note	Note associated with this linkset. If there is no note associated with this
		linkset, this field is blank.

		Cisco Signaling Gateway Manager User Guide

	OL-7064-01			8-65

Image 65

Contents Working with Linksets Viewing Basic Information for Linksets Right-Click Menu for a Specific Linkset Right-Click Menu for All LinksetsGo To SP DeleteConfirm Deletions checkbox in the Startup/Exit View Real-Time Data and Charts View Configuration DetailsGo To Node View ComponentsEvent History Snmp Trap Messages Drill-Down Linkset Access ListEvent History Status and Trap Event History Network StatusLinkset Table Active Links LinksCongested Links IgnoredDisplay the event icon in this field EventsLast Status Date and time that the status of the linkset last changedSection on page A-5 Viewing Detailed Information for a Linkset A new window Linkset Details Right-Click MenuOpens the Linkset Details Window for the selected linkset Deleting a Node section on page 6-100for more Go To Node Event History Snmp Trap Messages Linkset Linkset Details ComponentsSelect the checkbox to exclude the link Type Type of link. Possible link types areIndicates whether there is a note associated with the link Event icon in this fieldSection on page A-4 Naming Information Linkset Details Configuration DataStatus Information Is IgnoredStatus DescriptionCurrent status of the linkset. Possible values are Status ReasonLinkset Type General InformationInbound ACL Outbound ACLLinkset Details Recent Events Linkset Details NotesLinks Information Links Information sub-section contains the following fieldsApply Filter Set FilterRemove Filter PauseTime Difference Adjust Row HeightFind Create Sound FilterCategory Message Name SeverityTime Ack ByProbe Conn Linkset Details Linkset Access ListsProbe Link MessagePoll Interval Access ListLast Poll OutPoll Interval secs Linkset Statistics Details Poll SettingsSeconds Current Poll IntervalLinkset Statistics Details Notes Linkset Statistics Details Configuration DataLinkset Statistics Details Statistics Linkset Statistics Details Linkset Access ListsLinkset Statistics Details Recent Events Bit Information or Byte Information Packet InformationSent Per Sec Received Per SecSend Plan Capacity Utilization InformationSend Utilization % Send Utilization % = Bits Sent Per Sec/Planned CapacityReceive Utilization % Plan-capacity CS7 linkset configuration commandReceive Plan Capacity Service Information Linkset Statistics Details ChartsReceivedUtilization ReceivedUtilization Chart for a LinksetAdjacent linkset, select it in this list box Received Utilization ChartTime Window mins MinutesReceived Utilization ChartShow threshold line ResetFor Scale to thresholdSendUtilization Utilization ChartDd.dd is the send utilization percentage for that data point Send UtilizationThreshold for the selected link PktsRcvdPerSec PktsRcvdPerSec chartPackets Received Chart Received Chart To return the data to the chart, click the icon againReturn the data to the chart, click the icon again Packets ReceivedPktsSentPerSec PktsSentPerSec chartPackets Sent Chart Sent Chart Received Chart or Bytes Received Chart BitsRcvdPerSec or BytesRcvdPerSec chartBitsRcvdPerSec or BytesRcvdPerSec Following fields and buttonsReceived per second for that data point Bytes Received ChartAs a function of time, including data for up to 16 links BitsSentPerSec or BytesSentPerSec BytesSentPerSec chartSent Chart or Bytes Sent Chart Chart or Bytes Sent Chart Bytes Sent ChartFunction of time, including data for up to 16 links Sent per second for that data pointDrops Drops tab. SGM displays the Drops chartDrops chart contains the following fields and buttons Dd.dd is the number of drops for that data point Drops ChartTo 16 links Save CancelDeleting a Linkset from Your Network Viewing Notes for a LinksetDeleting a Linkset from the SGM Database Ignoring a Linkset Viewing the Network Status Linkset Dashboard Viewing Ignored LinksetsLast Update Header Update IntervalAccess Lists Server NameViewing ITP Linkset Status Section on page A-5 Status Reason Related Topic Viewing ITP Linkset DetailsSGM Linkset Details Table Description Latest Reports LinkPeaks Adjacent Point Code Poll Error MessageAdjacent Signaling Point Packets Received Per Sec GTT Accounting EnabledPackets Sent Per Sec Bits Received Per SecPlanned Capacity for ITP Not Set Receive UtilizationCapacity for ITP Not Set Displays Set Plan Capacity on ITPFor a linkset of type Serial or HSL, available bandwidth for Send Utilization = Bits Sent Per Sec./Planned CapacityIf Send Plan Capacity is not set on the ITP for one or more SGM Links Detail Table Signaling link code SLC ID for the linkInterface Name PortsUtilization CongestionEither a utilization percentage or a number of Erlangs Bits/SecViewing ITP Linkset Information Access Lists Node Name Node, signaling point, or linkset nameName, and Linkset Header Server Name Header Node/SP/LinksetOL-7064-01